Motorola manual Test and USE Using Your, Troubleshooting, Using Your H9, Base

4		TEST AND USE	USING YOUR
	Your phone and headset are now paired and		PORTABLE CHARGER
	ready to make and receive calls.		BASE
	To make a call:		The portable charger base provided with your
1	Place the headset in your ear. The eartip		headset can be used to cordlessly recharge
	should be inserted so that the headset feels		your headset anywhere. Once charged, the
			portable charger base provides power
	comfortable and forms a seal in the ear.
			on-the-go, extending your talk time by
	Note: See “Eartips and Your Headset” on the reverse		constantly “topping off” your headset’s battery.
	side of this guide for more information on using eartips
	with your headset.		Using the included Motorola power supply, you
2	On the phone, dial the number you want to		can charge both the portable charger base and
			headset at the same time. The portable base
	call and press SEND key on your phone.		charger provides two indicator lights for
3	If your phone and headset are successfully		charging status. See “Indicator Lights” in the
			reverse side of this guide for information on
	paired, you will hear ringing on the headset.
			these indicator lights.
	After you have successfully paired your		Note: Using your PC’s USB port as a power source for
	phone and headset, you don't need to
			charging is not recommended.
	repeat these steps. For daily use, ensure
	that your headset is turned ON and that
	your phone's Bluetooth feature is ON.

	TROUBLESHOOTING
USING YOUR H9
	My headset will not enter pairing mode.
See
	Make sure that any devices previously paired with
Features and	the headset are turned off. If the indicator light is
Functions Guide	not steadily lit in blue, turn off both the other
on the reverse side	device and headset, wait 10 seconds, then turn
for information on	headset back on. Wait for the indicator light to
using your H9	become steadily lit in blue, indicating the headset
	is now in pairing mode.
	My phone doesn't find my headset.
	Make sure the indicator light on your headset is
	on (lit in blue) and steady when your phone is
	searching for devices (see step 3).
	My headset worked before but now it's not
	working.
	Make sure your phone is on and the Bluetooth
	feature is turned on in your phone (see step 2). If
	the Bluetooth feature was turned off or was
	turned on only temporarily, you may need to
	restart the Bluetooth feature (see step 2) and pair
	your phone and headset again (see step 3).
	Support.
	If you need more help, contact us at
	1-877-MOTOBLU or visit us at
	www.hellomoto.com/Bluetoothsupport