Specifications
Technical Data | BT2200/2300 |
| BT3200/3300 |
|
|
|
|
Bluetooth version | Version 2.0 |
| |
|
|
| |
Frequency | 2.4 GHz ISM Band (2.4 – 2.4835 GHz) | ||
|
|
|
|
Output | 0 dBm |
| +17 dBm |
|
|
|
|
Bluetooth Class | Class 2: 10m |
| Class 1: 100m |
|
|
|
|
Channel/Devices | 2/3 |
| |
|
|
| |
Operating Temperature | |||
|
|
| |
Dimensions | 84(W) x 44.5(H) x 20.5(D) mm | ||
|
|
|
|
Weights | 50g |
| |
|
|
|
|
Specifications subject to change without notice.
30
Troubleshooting
Your Whistler headset is expertly engineered and designed to exacting quality standards to provide you with reliable,
Problem: Bluetooth Headset cannot be switched on
Please check the battery status (page 10) and charge the headset if necessary. Please make sure the headset is charged completely before first time use.
Problem: After the headset has been switch off and on again, it does not connect automatically to the last paired device.
Please make sure that the Bluetooth on the other device is activated. Switch all devices off and on again and put them in pairing mode. If the problem still exists, reset the headset and pair the headset and device again.
Problem: The headset is on, but you cannot hear any sound through the speakers.
Please check the volume level and increase if necessary. Please check if the speakers are OK and that the USB connector and jack are fully engaged. Also, please check the position of the speakers in the helmet.
31