Connectors
Expansion Interface II Connector (J5)
The board-to-board connector (J5) provides signals for the PPI, TWI interfaces and GPIO signals of the mating EZ-Board. The connector is located on the bottom side of the board. For availability and pricing of the connectors, contact Samtec.
Refer to “Expansion Interface” on page 1-6 for more information.
Part Description | Manufacturer | Part Number |
| | |
| | |
70-position 0.1’’, SMT socket | SAMTEC | SSW-135-22-F-D-VS |
| | |
| Mating Connector | |
| | |
70-position 0.1’’, SMT header | SAMTEC | TSSH-135-01-L-DV-A |
| | |
Expansion Interface II Connector (P2)
The board-to-board connector (P2) provides signals for the SPI, TWI, SPORT interfaces and GPIO signals of the mating EZ-Board. The con- nector is located on the top side of the board. For availability and pricing of the connectors, contact Samtec.
Refer to “Expansion Interface” on page 1-6 for more information.
Part Description | Manufacturer | Part Number |
| | |
| | |
50-position 0.1’’, SMT socket | SAMTEC | TSSH-125-01-L-DV-A |
| | |
| Mating Connector | |
| | |
50-position 0.1’’, SMT header | SAMTEC | SSW-125-22-F-D-VS |
| | |
2-10 | Bluetooth EZ-Extender Manual |