Configuration Switch
Positions 7 and 8 of the configuration switch enable or disable UART flow control. Other switch positions are intended for internal Analog Devices test purposes only and not supported.
By default, SW1 is all OFF. The switch settings are shown in Table
Table
SW1 Position | UART Flow Control Off | UART Flow Control On |
|
|
|
|
|
|
SW1.1 | OFF | OFF |
|
|
|
SW1.2 | OFF | OFF |
|
|
|
SW1.3 | OFF | OFF |
|
|
|
SW1.4 | OFF | OFF |
|
|
|
SW1.5 | OFF | OFF |
|
|
|
SW1.6 | OFF | OFF |
|
|
|
SW1.7 | OFF | ON |
|
|
|
SW1.8 | OFF | ON |
|
|
|
Bluetooth |