Allied Telesis AT-WR4500 manual Now complete the configuration for DualNS-1

AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers	69
RouterOS v3 Configuration and User Guide

￿

As we have not configured the DualNS-2 router, we cannot define the remote-mac parameter on DualNS-1. We will do it after configuring DualNS-2!

The configuration of DualNS-2:

[admin@DualNS-2] interface wireless> set wlan1,wlan2 mode=nstreme-dual-slave

[admin@DualNS-2] interface wireless> print Flags: X - disabled, R - running

0name="wlan1" mtu=1500 mac-address=00:0C:42:05:00:22 arp=enabled disable-running-check=no interface-type=Atheros AR5413 radio-name="000C42050022" mode=nstreme-dual-slave ssid="AT-WR4500" area="" frequency-mode=superchannel country=no_country_set antenna-gain=0 frequency=5180 band=5ghz scan-list=default rate-set=default supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps

supported-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps, 54Mbps

basic-rates-b=1Mbps basic-rates-a/g=6Mbps max-station-count=2007 ack-timeout=dynamic tx-power=default tx-power-mode=default noise-floor-threshold=default periodic-calibration=default burst-time=disabled fast-frames=no dfs-mode=none antenna-mode=ant-a wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no update-stats-interval=disabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no security-profile=default disconnect-timeout=3s on-fail-retry-time=100ms preamble-mode=both

1name="wlan2" mtu=1500 mac-address=00:0C:42:05:06:B2 arp=enabled disable-running-check=no interface-type=Atheros AR5413 radio-name="000C420506B2" mode=nstreme-dual-slave ssid="AT-WR4500" area="" frequency-mode=superchannel country=no_country_set antenna-gain=0 frequency=5180 band=5ghz scan-list=default

rate-set=default supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps supported-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,

54Mbps

basic-rates-b=1Mbps basic-rates-a/g=6Mbps max-station-count=2007 ack-timeout=dynamic tx-power=default tx-power-mode=default noise-floor-threshold=default periodic-calibration=default burst-time=disabled fast-frames=no dfs-mode=none antenna-mode=ant-a wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no update-stats-interval=disabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no security-profile=default disconnect-timeout=3s on-fail-retry-time=100ms preamble-mode=both

[admin@DualNS-2] interface wireless> nstreme-dual

[admin@DualNS-2] interface wireless nstreme-dual> add rx-radio=wlan1 \ \... tx-radio=wlan2 rx-frequency=5805 tx-frequency=5180 disabled=no \ \... remote-mac=00:0C:42:05:04:36

[admin@DualNS-2] interface wireless nstreme-dual> print Flags: X - disabled, R - running

0R name="nstreme1" mtu=1500 mac-address=00:0C:42:05:00:22 arp=enabled disable-running-check=no tx-radio=wlan2 rx-radio=wlan1 remote-mac=00:0C:42:05:04:36 tx-band=5ghz tx-frequency=5180 rx-band=5ghz rx-frequency=5805 rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps

rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps framer-policy=none framer-limit=4000

[admin@DualNS-2] interface wireless nstreme-dual>

Now complete the configuration for DualNS-1:

[admin@DualNS-1] interface wireless nstreme-dual> set 0 remote-mac=00:0C:42:05:00:22

[admin@DualNS-1] interface wireless nstreme-dual> print Flags: X - disabled, R - running

0R name="nstreme1" mtu=1500 mac-address=00:0C:42:05:04:36 arp=enabled disable-running-check=no tx-radio=wlan2 rx-radio=wlan1 remote-mac=00:0C:42:05:00:22 tx-band=5ghz tx-frequency=5805

rx-band=5ghz rx-frequency=5180 rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps framer-policy=none framer-limit=4000

[admin@DualNS-1] interface wireless nstreme-dual>