Allied Telesis AT-WR4500 manual Interfaces, Submenu level /routing rip interface

94	AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
	RouterOS v3 Configuration and User Guide

Example

To enable RIP protocol to redistribute the routes to the connected networks:

[admin@AT-WR4562] routing rip> set redistribute-connected=yes

[admin@AT-WR4562] routing rip> print distribute-default: never redistribute-static: no

redistribute-connected: no redistribute-ospf: no redistribute-bgp: no metric-default: 1 metric-static: 1 metric-connected: 1 metric-ospf: 1 metric-bgp: 1 update-timer: 30s timeout-timer: 3m garbage-timer: 2m

[admin@AT-WR4562] routing rip>

5.2.3 Interfaces

Submenu level: /routing rip interface

Description

In general you do not have to configure interfaces in order to run RIP. This command level is provided only for additional configuration of specific RIP interface parameters.

Property Description

interface (name; default: all) - interface on which RIP runs all - sets defaults for interfaces not having any specific settings

send (v1 v1-2 v2; default: v2) - specifies RIP protocol update versions to distribute

receive (v1 v1-2 v2; default: v2) - specifies RIP protocol update versions the router will be able to receive

authentication (none simple md5; default: none) - specifies authentication method to use for RIP messages

none - no authentication performed simple - plain text authentication

md5 - Keyed Message Digest 5 authentication

authentication-key (text; default: "") - specifies authentication key for RIP messages

in-prefix-list (name; default: "") - name of the filtering prefix list for received routes

out-prefix-list (name; default: "") - name of the filtering prefix list for advertised routes

￿

It is recommended not to use RIP version 1 wherever it is possible due to security issues

Example

To add an entry that specifies that when advertising routes through the ether1 interface, prefix list plout should be applied:

[admin@AT-WR4562] routing rip> interface add interface=ether1 \ \... prefix-list-out=plout

[admin@AT-WR4562] routing rip> interface print Flags: I - inactive

0interface=ether1 receive=v2 send=v2 authentication=none authentication-key="" prefix-list-in=plout prefix-list-out=none

[admin@AT-WR4562] routing rip>