Allied Telesis AT-WR4500 manual Question&Answer-Based Setup, Command name /ip hotspot setup

226	AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
	RouterOS v3 Configuration and User Guide

•/ip hotspot service-port- address translation helpers for the one-to-one NAT

•/ip hotspot walled-garden- Walled Garden rules at HTTP level (DNS names, HTTP request substrings)

•/ip hotspot walled-garden ip - Walled Garden rules at IP level (IP addresses, IP protocols)

•/ip hotspot user - local HotSpot system users

•/ip hotspot user profile - local HotSpot system users profiles (user groups)

•/ip hotspot active - dynamic list of all authenticated HotSpot users

•/ip hotspot cookie - dynamic list of all valid HTTP cookies

10.1.2Question&Answer-Based Setup

Command name: /ip hotspot setup

Questions

address pool of network (name) - IP address pool for the HotSpot network

dns name (text) - DNS domain name of the HotSpot gateway (will be statically configured on the local DNS proxy

dns servers (IP address,[IP address]) - DNS servers for HotSpot clients hotspot interface (name) - interface to run HotSpot on

ip address of smtp server (IP address; default: 0.0.0.0) - IP address of the SMTP server to redirect SMTP requests (TCP port 25) to (0.0.0.0 - no redirect )

local address of network (IP address; default: 10.5.50.1/24) - HotSpot gateway address for the interface

masquerade network (yes no; default: yes) - whether to masquerade the HotSpot network

name of local hotspot user (text; default: admin) - username of one automatically created user passphrase (text) - the passphrase of the certificate you are importing

password for the user (text) - password for the automatically created user

select certificate (name none import-other-certificate) - choose SSL certificate from the list of the imported certificates

•none - do not use SSL

•import-other-certificate- setup the certificates not imported yet, and ask this question again

￿

Depending on current settings and answers to the previous questions, default values of following questions may be different. Some questions may disappear if they become redundant

Example

To configure HotSpot on ether1 interface (which is already configured with address of 192.0.2.1/25), and adding user admin with password rubbish:

[admin@AT-WR4562] > ip hotspot setup hotspot interface: ether1

local address of network: 192.0.2.1/24

masquerade network: yes

address pool of network: 192.0.2.2-192.0.2.126

select certificate: none

ip address of smtp server: 0.0.0.0

dns servers: 192.0.2.254

dns name: hs.example.net

name of local hotspot user: admin

password for the user: rubbish [admin@AT-WR4562] >