Allied Telesis AT-WR4500 manual HotSpot Users, Submenu level /ip hotspot user

246	AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
	RouterOS v3 Configuration and User Guide

10.4.3HotSpot Users

Submenu level: /ip hotspot user

Property Description

address (IP address; default: 0.0.0.0) - static IP address. If not 0.0.0.0, client will always get the same IP address. A configured address implies, that only one simultaneous login for that user is allowed. Any existing address will be replaced with this one using the embedded one-to-one NAT

bytes-in(read-only: integer) - total amount of bytes received from user

bytes-out(read-only: integer) - total amount of bytes sent to user

email (text) - e-mail address. Only basic syntax checking is done to ensure validity of this field imit-bytes-in(integer; default: 0) - maximum amount of bytes user can transmit (i.e., bytes received from the user)

0 - no limit

limit-bytes-out(integer; default: 0) - maximum amount of bytes user can receive (i.e., bytes sent to the user)

0 - no limit

limit-bytes-total(integer; default: 0) - maximum aggregate amount of bytes user can receive and send (i.e., the sum of the amount of bytes sent to the user and received from it

0 - no limit

limit-uptime(time; default: 0s) - total uptime limit for user (pre-paid time)

0s - no limit

mac-address(MAC address; default: 00:00:00:00:00:00) - static MAC address. If not 00:00:00:00:00:00, client is allowed to login only from that MAC address

name (name) - user name. If authentication method is trial, then user name will be set automaticly after following pattern "T-MAC_adress", where MAC_address is trial user Mac address

packets-in(read-only: integer) - total amount of packets received from user (i.e., packets received from the user)

packets-out(read-only: integer) - total amount of packets sent to user (i.e., packets sent to the user) password (text) - user password

profile (name; default: default) - user profile

routes (text) - routes that are to be registered on the HotSpot gateway when the client is connected. The route format is: dst-address [[gateway] [metric]] (for example, 10.1.0.0/24 10.0.0.1 1). Several routes may be specified separated with commas. If gateway is not specified, the remote address is used. If metric is not speciefied, the metric of 1 is used

server (name all; default: all) - which HotSpot server is this user allowed to log in to

uptime (read-only: time) - total time user has been logged in

￿

In case of mac authentication method, clients' MAC addresses can be used as usernames (without password) The byte limits are total limits for each user (not for each session as at /ip hotspot active). So, if a user has already downloaded something, then session limit will show the total limit - (minus) already downloaded. For example, if download limit for a user is 100MB and the user has already downloaded 30MB, then session download limit after login at /ip hotspot active will be 100MB - 30MB = 70MB. Should a user reach his/her limits (bytes-in >= limit-bytes-in or bytes-out >= limit-bytes- out), he/she will not be able to log in anymore. The statistics is updated if a user is authenticated via local user database each time he/she logs out. It means, that if a user is currently logged in, then the statistics will not show current total values. Use /ip hotspot active submenu to view the statistics on the current user sessions.If the user has IP address specified, only one simultaneous login is allowed. If the same credentials are used again when the user is still active, the active one will be automatically logged off.Trial users will have dynamic records here with their name written as "T-[mac]" (where [mac] is the user's MAC address, without the brackets), email set to the password the user has supplied, mac-address - the client's MAC address, profile and limit-uptime - the respective values of trial- user-profile and trial-uptime limit properties of the HotSpot server profile. The entries will be automatically removed once the trial user times out (after trial-uptime reset time).