Allied Telesis AT-WR4500 # Interface RADIO-NAME MAC-ADDRESS, Wlan1 000C42185C3D, No -38dBm.. Mbps

44	AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
	RouterOS v3 Configuration and User Guide

client-tx-limit(read-only: integer) - transmit rate limit on the AP, in bits per second

compression (read-only: yes no) - whether data compresson is used for this peer

encryption (read-only: aes-ccm tkip) - unicast encryption algorithm used

frame-bytes(read-only: integer, integer) - number of sent and received data bytes excluding header information

frames (read-only: integer, integer) - number of sent and received 802.11 data frames excluding retransmitted data frames

framing-current-size(read-only: integer) - current size of combined frames

framing-limit(read-only: integer) - maximal size of combined frames

framing-mode(read-only: none best-fit exact-size; default: none) - the method how to combine frames

group-encryption(read-only: aes-ccm tkip) - group encryption algorithm used

hw-frame-bytes(read-only: integer, integer) - number of sent and received data bytes including header information

hw-frames(read-only: integer, integer) - number of sent and received 802.11 data frames including retransmitted data frames

interface (read-only: name) - interface that client is registered to

last-activity(read-only: time) - last interface data tx/rx activity

last-ip(read-only: IP address) - IP address found in the last IP packet received from the registered client

mac-address(read-only: MAC address) - MAC address of the registered client

nstreme (read-only: yes no) - whether nstreme protocol is used for this link

p-throughput(read-only: integer) - estimated approximate throughput that is expected to the given peer, taking into account the effective transmit rate and hardware retries. Calculated once in 5 seconds packed-bytes(read-only: integer, integer) - number of bytes packed into larger frames for transmitting/receiving (framing)

packed-frames(read-only: integer, integer) - number of frames packed into larger ones for transmitting/receiving (framing)

packets (read-only: integer, integer) - number of sent and received network layer packets

radio-name(read-only: text) - radio name of the peer

routeros-version(read-only: name) - RouterOS version of the registered client

rx-ccq(read-only: integer: 0..100) - Client Connection Quality - a value in percent that shows how effective the receive bandwidth is used regarding the theoretically maximum available bandwidth. Mostly it depends from an amount of retransmited wireless frames.

rx-rate(read-only: integer) - receive data rate

signal-strength(read-only: integer) - average strength of the client signal recevied by the AP

signal-to-noise(read-only: text) - signal to noise ratio

strength-at-rates(read-only: text) - signal strength level at different rates together with time how long were these rates used

tx-ccq(read-only: integer: 0..100) - Client Connection Quality - a value in percent that shows how effective the transmit bandwidth is used regarding the theoretically maximum available bandwidth. Mostly it depends from an amount of retransmited wireless frames.

tx-frames-timed-out(read-only: integer) - number of frames that have been discarded due to frame- lifetime timeout

tx-rate(read-only: integer) - transmit data rate

tx-signal-strength(read-only: integer) - average power of the AP transmit signal as received by the client device

uptime (read-only: time) - time the client is associated with the access point

wds (read-only: no yes) - whether the connected client is using wds or not

wmm-enabled(read-only: yes no) - whether WMM is used with this peer

Example

To see registration table showing all clients currently associated with the access point:

[admin@AT-WR4562] interface wireless registration-table>			print
# INTERFACE	RADIO-NAME	MAC-ADDRESS	AP SIGNAL... TX-RATE
0 wlan1	000C42185C3D	00:0C:42:18:5C:3D	no -38dBm... 54Mbps

[admin@AT-WR4562] interface wireless registration-table>