Allied Telesis AT-WR4500 manual Frequency Monitor, ManualTransmit PowerTable

54	AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
	RouterOS v3 Configuration and User Guide

Example

[admin@AT-WR4562] interface wireless align> monitor wlan2
# ADDRESS	SSID	RXQ AVG-RXQ LAST-RX TXQ LAST-TX CORRECT
0 00:01:24:70:4B:FC	wirelesa	-60 -60	0.01	-67 0.01	100 %

[admin@AT-WR4562] interface wireless align>

4.3.13Frequency Monitor

Description

Aproximately shows how loaded are the wireless channels.

Property Description

freq (read-only: integer) - shows current channel

use (read-only: percentage) - shows usage in current channel

Example

Monitor 802.11b network load:

[admin@AT-WR4562] interface wireless> frequency-monitor wlan1

FREQ USE

2412MHz 3.8%

2417MHz 9.8%

2422MHz 2%

2427MHz 0.8%

2432MHz 0%

2437MHz 0.9%

2442MHz 0.9%

2447MHz 2.4%

2452MHz 3.9%

2457MHz 7.5%

2462MHz 0.9%

To monitor other bands, change the the band setting for the respective wireless interface.

4.3.14ManualTransmit PowerTable

Submenu level: /interface wireless manual-tx-power-table

Description

In this submenu you can define signal strength for each rate. You should be aware that you can damage your wireless card if you set higher output power than it is allowed.

￿

The values in this table are set in dBm! NOT in mW! Therefore this table is used mainly to reduce the transmit power of the card.

Property Description

manual-tx-powers(text) - define tx-power in dBm for each rate, separate by commas