Allied Telesis AT-WR4500 Application Examples, Station and AccessPoint, Snoop 802.11b network

60	AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
	RouterOS v3 Configuration and User Guide

Property Description

channel-time(time; default: 200ms) - how long to snoop each channel, if multiple-channels is set to yes

multiple-channels(yes no; default: no) - whether to snoop multiple channels or a single channel no - wireless snooper snoops only one channel in frequency that is configured in /interface wireless yes - snoop in all channels that are listed in the scan-list in /interface wireless receive-errors(yes no; default: no) - whether to receive packets with CRC errors

Command Description

snoop - starts monitoring wireless channels

wireless interface name - interface that monitoring is performed on BAND - operating band

Example

Snoop 802.11b network:

[admin@AT-WR4562] interface wireless snooper>					snoop wlan1
BAND	FREQ	USE	BW	NET-COUNT	STA-COUNT
2.4ghz-b	2412MHz	1.5%	11.8kbps	2	2
2.4ghz-b	2417MHz	1.3%	6.83kbps	0	1
2.4ghz-b	2422MHz	0.6%	4.38kbps	1	1
2.4ghz-b	2427MHz	0.6%	4.43kbps	0	0
2.4ghz-b	2432MHz	0.3%	2.22kbps	0	0
2.4ghz-b	2437MHz	0%	0bps	0	0
2.4ghz-b	2442MHz	1%	8.1kbps	0	0
2.4ghz-b	2447MHz	1%	8.22kbps	1	1
2.4ghz-b	2452MHz	1%	8.3kbps	0	0
2.4ghz-b	2457MHz	0%	0bps	0	0
2.4ghz-b	2462MHz	0%	0bps	0	0

[admin@AT-WR4562] interface wireless snooper>

4.3.21Application Examples

Station and AccessPoint

This example shows how to configure 2 RouterOS routers - one as Access Point and the other one as a station on 5GHz (802.11a standard).

Access Point

Interface: AP

IP: 10.1.0.1

Interface: To-AP

IP: 10.1.0.2

Station

Figure 5: Station and AP mode example

•On Access Point:

•mode=ap-bridge

•frequency=5805

•band=5ghz

•ssid=test