AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers

97

RouterOS v3 Configuration and User Guide

 

 

 

The necessary configuration of the RIP general settings is as follows:

[admin@AT-WR4562] routing rip> set redistribute-connected=yes

[admin@AT-WR4562] routing rip> print distribute-default: never redistribute-static: no

redistribute-connected: yes redistribute-ospf: no redistribute-bgp: no

metric-default: 1 metric-static: 1 metric-connected: 1 metric-ospf: 1 metric-bgp: 1

update-timer: 30s timeout-timer: 3m garbage-timer: 2m [admin@AT-WR4562] routing rip>

The minimum required configuration of RIP interface is just enabling the network associated with the ether1 interface:

[admin@AT-WR4562] routing rip network> add network=10.0.0.0/2

[admin@AT-WR4562] routing rip network> print

# ADDRESS

0 10.0.0.0/24

[admin@AT-WR4562] routing rip network>

￿

There is no need to run RIP on the ether2, as no propagation of RIP information is required into the Remote network in this example.

The routes obtained by RIP can be viewed in the /routing rip route menu:

[admin@AT-WR4562] routing rip> route print

Flags: S - static, R - rip, O - ospf, C - connect, B - bgp

0 R dst-address=0.0.0.0/0 gateway=10.0.0.26 metric=2 from=10.0.0.26

1 C dst-address=10.0.0.0/24 gateway=0.0.0.0 metric=1 from=0.0.0.0

2 C dst-address=192.168.0.0/24 gateway=0.0.0.0 metric=1 from=0.0.0.0

3 R dst-address=192.168.1.0/24 gateway=10.0.0.26 metric=1 from=10.0.0.26

4 R dst-address=192.168.3.0/24 gateway=10.0.0.26 metric=1 from=10.0.0.26

[admin@AT-WR4562] routing rip>

The regular routing table is:

[admin@AT-WR4562] routing rip> /ip route print

Flags: X - disabled, I - invalid, D - dynamic, J - rejected,

C - connect, S - static, R - rip, O - ospf, B - bgp

 

#

DST-ADDRESS

G GATEWAY

DISTANCE INTERFACE

0

R 0.0.0.0/0

r 10.0.0.26

120

ether1

1

R 192.168.3.0/24

r 10.0.0.26

120

ether1

2

R 192.168.1.0/24

r 10.0.0.26

120

ether1

3

DC 192.168.0.0/24

r 0.0.0.0

0

ether2

4

DC 10.0.0.0/24

r 0.0.0.0

0

ether1

[admin@AT-WR4562] routing rip>

Page 97
Image 97
Allied Telesis AT-WR4500 manual Regular routing table is, Admin@AT-WR4562 routing rip set redistribute-connected=yes