Allied Telesis AT-WR4500 Router Users, Only one, it cannot be removed, Admin@rb13 user group

AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers	147
RouterOS v3 Configuration and User Guide

Example

To add reboot group that is allowed to reboot the router locally or using telnet, as well as read the router's configuration, enter the following command:

[admin@rb13] user group> add name=reboot policy=telnet,reboot,read,local

[admin@rb13] user group> print

0 name="read" policy=local,telnet,ssh,reboot,read,test,winbox,password,web, sniff,!ftp,!write,!policy

1 name="write" policy=local,telnet,ssh,reboot,read,write,test,winbox,password, web,sniff,!ftp,!policy

2 name="full" policy=local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox, password,web,sniff

3 name="reboot" policy=local,telnet,reboot,read,!ssh,!ftp,!write,!policy,!test, !winbox,!password,!web,!sniff

[admin@rb13] user group>

7.3.3 Router Users

Submenu level: /user

Description

Router user database stores the information such as username, password, allowed access addresses and group about router management personnel.

Property Description

address (IP address/netmask; default: 0.0.0.0/0) - host or network address from which the user is allowed to log in

group (name) - name of the group the user belongs to

name (name) - user name. Although it must start with an alphanumeric character, it may contain "*", "_", "." and "@" symbols

password (text; default: "") - user password. If not specified, it is left blank (hit [Enter] when logging in). It conforms to standard Unix characteristics of passwords and may contain letters, digits, "*" and "_" symbols

￿	There is one predefined user with full access rights:
		[admin@AT-WR4562] user> print
		Flags: X - disabled
		#	NAME	GROUP ADDRESS
		0	;;; system default user
			admin	full 0.0.0.0/0
		[admin@AT-WR4562] user>
	There always should be at least one user with fulls access rights. If the user with full access rights is the
	only one, it cannot be removed.