Allied Telesis AT-WR4500 HotSpot User AAA, MAC-ADDRESS Address TO-ADDRESS Server IDLE-TIMEOUT

244	AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
	RouterOS v3 Configuration and User Guide

If all fields has been filled in the ip-binding table and type has been set to bypassed, then the IP address of this entry will be accessible from public interfaces immediately:

[admin@AT-WR4562] ip hotspot ip-binding> print
Flags: X - disabled, P - bypassed, B - blocked
#	MAC-ADDRESS	ADDRESS	TO-ADDRESS	SERVER
0	P	10.11.12.3
1	P 00:01:02:03:04:05	10.11.12.3	10.11.12.3	hs-local

[admin@AT-WR4562] ip hotspot ip-binding> .. host print

Flags: S - static, H - DHCP, D - dynamic, A - authorized, P - bypassed

#	MAC-ADDRESS	ADDRESS	TO-ADDRESS	SERVER IDLE-TIMEOUT
0	SB 00:01:02:03:04:05	10.11.12.3	10.11.12.3	hs-local

10.4HotSpot User AAA

10.4.1General Information

Summary

This document provides information on authentication, authorization and accounting parameters and configuration for HotSpot gateway system.

Specifications

Packages required: system

License required: Level1

Submenu level: /ip hotspot user

Standards and Technologies: RADIUS

Hardware usage: Local traffic accounting requires additional memory

RelatedTopics

Hot Spot Service

PPPUser AAA Router User AAA RADIUS client

Software Package Management IP Addresses and ARP

10.4.2HotSpot User Profiles

Submenu level: /ip hotspot user profile

Description

HotSpot User profiles are used for common user settings. Profiles are like user groups, they are grouping users with the same limits.

Property Description

address-pool(name none; default: none) - the IP pool name which the users will be given IP addresses from. This works like dhcp-poolmethod in earlier versions of RouterOS, except that it does not use DHCP, but rather the embedded one-to-one NAT

none - do not reassign IP addresses to the users of this profile

advertise (yes no; default: no) - whether to enable forced advertisement popups for this profile

advertise-interval(multiple choice: time; default: 30m,10m) - set of intervals between showing advertisement popups. After the list is done, the last value is used for all further advertisements

advertise-timeout(time immediately never; default: 1m) - how long to wait for advertisement to be shown, before blocking network access with walled-garden