Allied Telesis AT-WR4500 manual Export Command, Import Command

AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers				19
RouterOS v3 Configuration and User Guide
	To see the files stored on the router:
	[admin@AT-WR4562] > file print
	# NAME	TYPE	SIZE	CREATION-TIME
	0 test.backup	backup	12567	sep/08/2004 21:07:50
	[admin@AT-WR4562] >

To load the saved backup file test:

[admin@AT-WR4562] system backup> load name=test Restore and reboot? [y/N]:

Y

Restoring system configuration

System configuration restored, rebooting now

3.1.2 The Export Command

Command name: /export

Description

The export command prints a script that can be used to restore configuration. The command can be invoked at any menu level, and it acts for that menu level and all menu levels below it. The output can be saved into a file, available for download using FTP.

Command Description

file=[filename] - saves the export to a file

Example

[admin@AT-WR4562] > ip address print
Flags: X - disabled, I - invalid, D - dynamic
#	ADDRESS	NETWORK	BROADCAST	INTERFACE
0	10.1.0.172/24	10.1.0.0	10.1.0.255	bridge1
1	10.5.1.1/24	10.5.1.0	10.5.1.255	ether1

[admin@AT-WR4562] >

To make an export file:

[admin@AT-WR4562] ip address> export file=address

[admin@AT-WR4562] ip address>

To see the files stored on the router:

[admin@AT-WR4562] > file print
# NAME	TYPE	SIZE	CREATION-TIME
0 address.rsc	script	315	dec/23/2003 13:21:48
[admin@AT-WR4562] >

3.1.3 The Import Command

Command name: /import

Description

The root level command /import [file_name] executes a script, stored in the specified file adds the configuration from the specified file to the existing setup. This file may contain any console comands, including scripts. is used to restore configuration or part of it after a /system reset event or anything that causes configuration data loss.