Allied Telesis AT-WR4500 manual Health Graphing, Interface Graphing, Simple Queue Graphing

AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers	263
RouterOS v3 Configuration and User Guide

12.4.3Health Graphing

Submenu level: /tool graphing health

Description

This submenu provides information about RouterBoard's 'health' - voltage and temperature. For this option, you have to install the routerboard package.

Property Description

allow-address(IP address/netmask; default: 0.0.0.0/0) - network which is allowed to view graphs of router health

store-on-disk(yes no; default: yes) - whether to store information about traffic on system drive or not. If not, the information will be stored in RAM and will be lost after a reboot

12.4.4Interface Graphing

Submenu level: /tool graphing interface

Description

Shows how much traffic is passed through an interface over a period of time.

Property Description

allow-address(IP address/netmask; default: 0.0.0.0/0) - IP address range which is allowed to view information about the interface. If a client PC not belonging to this IP address range tries to open http://[Router_IP_address]/graphs/, it will not see this entry

interface (name; default: all) - name of the interface which will be monitored

store-on-disk(yes no; default: yes) - whether to store information about traffic on system drive or not. If not, the information will be stored in RAM and will be lost after a reboot

Example

To monitor traffic which is passed through interface ether1 only from local network 192.168.0.0/24, and write information on disk:

[admin@AT-WR4562] tool graphing interface> add interface=ether1 \ \... allow-address=192.168.0.0/24 store-on-disk=yes [admin@AT-WR4562] tool graphing interface> print

Flags: X - disabled

# INTERFACE ALLOW-ADDRESS STORE-ON-DISK

0 ether1 192.168.0.0/24 yes [admin@AT-WR4562] tool graphing interface>

12.4.5Simple Queue Graphing

Submenu level: /tool graphing queue

Description

In this submenu you can specify a queue from the /queue simple list to make a graphic for it.

Property Description

allow-address(IP address/netmask; default: 0.0.0.0/0) - network which is allowed to view graphs of router health

allow-target(yes no; default: yes) - whether to allow access to web graphing from IP range that is specified in /queue simple target-address

simple-queue(name; default: all) - name of simple queue which will be monitored

store-on-disk(yes no; default: yes) - whether to store information about traffic on hard drive or not. If not, the information will be stored in RAM and will be lost after a reboot