Allied Telesis AT-WR4500 manual Ipip Setup, Add an IP address to created ipip1 interface

AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers	159
RouterOS v3 Configuration and User Guide

Add an IPIP interface (by default, its name will be ipip1):

[admin@10.5.8.104] interface ipip> add local-address=10.5.8.104 \ remote-address=10.1.0.172 disabled=no

Add an IP address to created ipip1 interface:

[admin@10.5.8.104] ip address> add address=10.0.0.1/24 interface=ipip1

Configuration on router with IP address 10.1.0.172:

Add an IPIP interface (by default, its name will be ipip1):

[admin@10.1.0.172] interface ipip> add local-address=10.1.0.172 \ remote-address=10.5.8.104 disabled=no

Add an IP address to created ipip1 interface:

[admin@10.1.0.172] ip address> add address=10.0.0.2/24 interface=ipip1

Specifications

Packages required: system

License required: Level1 (limited to 1 tunnel) , Level3 (200 tunnels) , Level5 (unlimited)

Submenu level: /interface ipip

Standards and Technologies: IPIP (RFC 2003)

Hardware usage: Not significant

RelatedTopics

IP Addresses and ARP

Log Management

Additional Resources

http://www.ietf.org/rfc/rfc1853.txt?number=1853

http://www.ietf.org/rfc/rfc2003.txt?number=2003

http://www.ietf.org/rfc/rfc1241.txt?number=1241

8.4.2 IPIP Setup

Submenu level: /interface ipip

Description

An IPIP interface should be configured on two routers that have the possibility for an IP level connection and are RFC 2003 compliant. The IPIP tunnel may run over any connection that transports IP. Each IPIP tunnel interface can connect with one remote router that has a corresponding interface configured. An unlimited number of IPIP tunnels may be added to the router. For more details on IPIP tunnels, see RFC 2003.

Property Description

local-address(IP address) - local address on router which sends IPIP traffic to the remote host mtu (integer; default: 1480) - Maximum Transmission Unit. Should be set to 1480 bytes to avoid fragmentation of packets. May be set to 1500 bytes if mtu path discovery is not working properly on links

name (name; default: ipipN) - interface name for reference

remote-address(IP address) - the IP address of the remote host of the IPIP tunnel - may be any RFC 2003 compliant router