Allied Telesis AT-WR4500 manual IPIPTunnel Interfaces, For Office2

158	AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
	RouterOS v3 Configuration and User Guide

Bonding configuration

for Office1

[admin@office1] interface bonding> add slaves=eoip-tunnel1,eoip-tunnel2

[admin@office1] interface bonding> print Flags: X - disabled, R - running

0R name="bonding1" mtu=1500 mac-address=00:0C:42:03:20:E7 arp=enabled slaves=eoip-tunnel1,eoip-tunnel2 mode=balance-rr primary=none link-monitoring=none arp-interval=00:00:00.100 arp-ip-targets=""

mii-interval=00:00:00.100 down-delay=00:00:00 up-delay=00:00:00 lacp-rate=30secs

[admin@office1]		ip address> add address=3.3.3.1/24 interface=bonding1
[admin@office1] ip address> print
Flags: X - disabled, I - invalid, D - dynamic
#	ADDRESS		NETWORK	BROADCAST	INTERFACE
0	1.1.1.1/24		1.1.1.0	1.1.1.255	isp2
1	10.1.0.111/24		10.1.0.0	10.1.0.255	isp1
2	3.3.3.1/24		3.3.3.0	3.3.3.255	bonding1

for Office2

[admin@office2] interface bonding> add slaves=eoip-tunnel1,eoip-tunnel2

[admin@office2] interface bonding> print Flags: X - disabled, R - running

0R name="bonding1" mtu=1500 mac-address=00:0C:42:03:20:E7 arp=enabled slaves=eoip-tunnel1,eoip-tunnel2 mode=balance-rr primary=none link-monitoring=none arp-interval=00:00:00.100 arp-ip-targets=""

mii-interval=00:00:00.100 down-delay=00:00:00 up-delay=00:00:00 lacp-rate=30secs

[admin@office2]		ip	address> add address=3.3.3.2/24 interface=bonding1
[admin@office2] ip address> print
Flags: X - disabled, I - invalid, D - dynamic
#	ADDRESS		NETWORK	BROADCAST	INTERFACE
0	2.2.2.1/24		2.2.2.0	2.2.2.255	isp2
1	10.1.0.112/24		10.1.0.0	10.1.0.255	isp1
2	3.3.3.2/24		3.3.3.0	3.3.3.255	bonding1
[admin@office2] ip			address> /ping 3.3.3.1

3.3.3.164 byte ping: ttl=64 time=2 ms

3.3.3.164 byte ping: ttl=64 time=2 ms

2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 2/2.0/2 ms

8.4IPIPTunnel Interfaces

8.4.1 General Information

Summary

The IPIP tunneling implementation on the RouterOS is RFC 2003 compliant. IPIP tunnel is a simple protocol that encapsulates IP packets in IP to make a tunnel between two routers. The IPIP tunnel interface appears as an interface under the interface list. This protocol makes multiple network schemes possible.

IP tunneling protocol adds the following possibilities to network setup:

•to tunnel Intranets over the Internet

•to use it instead of source routing

Quick Setup Guide

To make an IPIP tunnel between two RouterOS routers with IP addresses 10.5.8.104 and 10.1.0.172, using IPIP tunnel addresses 10.0.0.1 and 10.0.0.2, follow the next steps.

Configuration on router with IP address 10.5.8.104: