Cardo Q2 Using the MP3 Player with Your Headset, Support, Saving an FM Radio Station, MP3 cable

Page 12

Saving an FM Radio Station

The FM Radio is equipped with a memory capacity of six stations.

•Select the station you wish to replace by tapping the MC button until you find the station you want to replace.

•Search for a new station as described above.

•Tap the MC Button within 20 seconds of finding the station to save the current station.

If you don't save the station, the Radio will exit search mode without saving the current station. You can still continue to listen to the current unsaved station. Tapping the MC Button in this case will move to the next saved station.

USING THE MP3 PLAYER WITH YOUR HEADSET

Your scala rider Q2 headset can be connected to an MP3 player device by plugging it to the Helmet Clamp’s jack with

the MP3 cable.

At your option, you may further secure the MP3 cable by using the MP3 cable holder. For this purpose please proceed as follows:

4.Attach the clamp and headset onto your helmet as described previously in section “ATTACHING THE CLAMP ON THE HELMET”.

5.Attach the speakers to your helmet as described in section

”POSITIONING THE SPEAKERS”.

6.Connect the MP3 cable to your MP3

player device’s jack and the other side to the helmet Clamp’s jack, inserting the cable through the MP3 cable holder.

Make sure that the cable plug clicks Insert cable in hook into place.

7.Tuck the MP3 cable into the hook of the MP3 cable holder.

8.In order to use your MP3 player, power on the headset to have it on Standby mode, flashing slowly in Blue.

NOTE: Operate the MP3 Player device by using its buttons (FF/REW/ PLAY/PAUSE).

Volume can only be adjusted through the MP3 Player.

Any other audio connection will automatically mute the MP3 Player. The audio signal will return only when headset is once again in Standby mode.

1.Use the enclosed Allen Wrench to remove both Allen screws from Helmet clamp and release the clamp’s back plate.

2.Place the MP3 cable holder on the helmet clamp. Both pins on the MP3 cable holder should be fixed into corresponding indentations on clamp.

MP3 cable holder hook

SUPPORT

For additional information please visit our website at

www.cardosystems.com

FAQ: www.cardosystems.com/support/faq or contact us at: support@cardosystems.com

3.Place the Back Plate on top of the MP3 cable holder and secure all parts together using the Allen screws that were previously removed, as shown in photo.

Phone: USA and Canada – + 1-800-488-0363International – +4989 450 36819

12 scala rider® Q2™ MultiSet

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Q2 MultiSet Scala rider Q2 MultiSet Contents of Retail BOX IntroductionBefore Using Charging Headset SET UP and ConfigurationSET UP for BIKE-TO-BIKE Intercom Pairing Reset Intercom Pairing Make sure that both headsets are now flashing slowly in BlueSET UP for Mobile Phone Calls Pairing To Pair the Scala Rider Q2 to a Bluetooth Mobile PhoneSET UP for Bluetooth GPS Device Pairing To Pair the Scala Rider Q2 to a Bluetooth GPS DeviceAttaching the Clamp on the Helmet Standard MethodGlue Plate Method Positioning the Speakers Using the Headset Or MC Button Connect Single tap the MC ButtonDouble tap the MC Button Enable/Disable Voice Connect feature Making and Receiving Mobile Phone CallsReceiving Intercom calls Short press the Ctrl Button to end a callStatus Light States Working with the FM RadioUsing the MP3 Player with Your Headset SupportSaving an FM Radio Station MP3 cableWaiver and General Release Return for Full Refund
Related manuals
Manual 14 pages 45.62 Kb

Q2 specifications

The Cardo Q2 is an innovative communication system designed specifically for motorcyclists, enhancing the riding experience through seamless connectivity and advanced features. Manufactured by Cardo Systems, a leader in the motorcycle communication industry, the Q2 sets the standard for rider intercom technology with its robust functionality and user-friendly design.

One of the main features of the Cardo Q2 is its ability to facilitate intercom communication between riders. The system utilizes Bluetooth technology to connect with other Q2 units or compatible devices, allowing for clear and reliable communication over distances of up to 1.6 kilometers (approximately one mile). This range is particularly beneficial for group rides, ensuring that all participants can keep in touch without the need for cumbersome hand signals or stopovers.

The Q2 is equipped with advanced noise cancellation technology, significantly reducing the sound of wind and road noise, which can often interfere with communication. This feature is crucial for maintaining clear audio quality, allowing riders to communicate at high speeds and in varying weather conditions without distraction.

In terms of usability, the Cardo Q2 boasts an intuitive interface. It includes large, glove-friendly buttons that simplify operation, even with riding gloves on. The modular design of the Q2 allows for easy installation on various helmet types, making it a versatile choice for riders with different preferences.

Additionally, the Q2 supports music sharing and can connect to smartphones via Bluetooth, enabling riders to enjoy their favorite playlists or podcasts while on the road. The ability to seamlessly switch between music and intercom communication gives riders the flexibility to customize their riding experience.

The battery life of the Cardo Q2 is another standout feature. With up to 13 hours of talk time on a single charge, riders can rely on the system for long journeys without the worry of battery depletion.

Built to withstand the elements, the Q2 is water-resistant, ensuring durability in adverse weather conditions. Overall, the Cardo Q2 combines cutting-edge technology with practical design, making it an essential tool for motorcyclists seeking enhanced communication and connectivity on their adventures.
Top Page Image Contents