Cardo Q2 manual Using the Headset, Or MC Button Connect Single tap the MC Button

Page 9
VOICE CONNECT:
Start talking
A Buddy Intercom call will be established and stay on until both sides are quiet for 30 seconds.
Intercom call interrupts FM Radio
USING THE INTERCOM
Making Intercom calls
To start a Buddy Intercom call with the Primary Buddy the headset is on Standby you can either:
A high priority Audio Source will always interrupt any lower priority Audio Source.
i.e. Mobile phone call interrupts Intercom call

REMOVING:

Press here

Your headset can be removed for charg-

to remove

ing and storage by pressing your finger

 

 

gently against the tab and sliding the

 

headset up with the other hand.

 

We recommend that you remove the

 

headset from the helmet when not in use.

 

USING THE HEADSET

GENERAL USAGE

 

GENERAL FUNCTIONS

DESIRED RESULT:

REQUIRED ACTION:

Turn on the

Press the CTRL Button steadily for at least three

headset

seconds

Turn off the

Press the CTRL Button steadily for at least three

headset

seconds

Increase the

Short press the Volume Up Button

volume

 

Decrease the

Short press the Volume Down Button

volume

 

AGC (Automatic Gain Control): In addition to manual Volume Control, the scala rider Q2 will automatically increase and reduce its volume according to ambient noise and driving speed.

AUDIO SOURCES AND PRIORITIES

The different Audio Sources that are connected to the scala rider Q2 are prioritized as follows:

Highest 1. Mobile phone Audio / GPS device (Incoming/outgoing calls ,     GPS audio and navigation instructions)

2.Primary Buddy Audio and Secondary Buddy Audio

3.FM Radio

Lowest 4. MP3 Connectivity

English

while

or MC BUTTON CONNECT:

Single tap the MC Button

A Buddy Intercom call will be established. To end the Buddy Intercom call, single tap the MC Button again.

To start a Buddy Intercom call with the Secondary Buddy

while the headset is on Standby:

MC BUTTON CONNECT:

MC Button

Double tap the MC Button

 

 

A Buddy Intercom call will be established. To end the

Buddy Intercom call, double tap the MC Button again.

NOTE: When using a scala rider Headset (not a Q2 version) as a Passenger headset, Voice Connect Intercom can be initiated only by the scala rider Q2 headset. Manual Connect Intercom can be initiated from either headset.

Failed Connection: On the scala rider Q2, if you attempt to start a Buddy Intercom call with a Buddy that is already on a Phone/GPS/ Intercom call, you will hear a double beep indicating the Buddy is busy.

scala rider® Q2™ MultiSet

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Q2 MultiSet Scala rider Q2 MultiSet Introduction Contents of Retail BOXBefore Using Charging Headset SET UP and ConfigurationSET UP for BIKE-TO-BIKE Intercom Pairing Make sure that both headsets are now flashing slowly in Blue Reset Intercom PairingTo Pair the Scala Rider Q2 to a Bluetooth Mobile Phone SET UP for Mobile Phone Calls PairingSET UP for Bluetooth GPS Device Pairing To Pair the Scala Rider Q2 to a Bluetooth GPS DeviceAttaching the Clamp on the Helmet Standard MethodGlue Plate Method Positioning the Speakers Using the Headset Or MC Button Connect Single tap the MC ButtonDouble tap the MC Button Making and Receiving Mobile Phone Calls Enable/Disable Voice Connect featureReceiving Intercom calls Short press the Ctrl Button to end a callWorking with the FM Radio Status Light StatesSupport Using the MP3 Player with Your HeadsetSaving an FM Radio Station MP3 cableWaiver and General Release Return for Full Refund
Related manuals
Manual 14 pages 45.62 Kb

Q2 specifications

The Cardo Q2 is an innovative communication system designed specifically for motorcyclists, enhancing the riding experience through seamless connectivity and advanced features. Manufactured by Cardo Systems, a leader in the motorcycle communication industry, the Q2 sets the standard for rider intercom technology with its robust functionality and user-friendly design.

One of the main features of the Cardo Q2 is its ability to facilitate intercom communication between riders. The system utilizes Bluetooth technology to connect with other Q2 units or compatible devices, allowing for clear and reliable communication over distances of up to 1.6 kilometers (approximately one mile). This range is particularly beneficial for group rides, ensuring that all participants can keep in touch without the need for cumbersome hand signals or stopovers.

The Q2 is equipped with advanced noise cancellation technology, significantly reducing the sound of wind and road noise, which can often interfere with communication. This feature is crucial for maintaining clear audio quality, allowing riders to communicate at high speeds and in varying weather conditions without distraction.

In terms of usability, the Cardo Q2 boasts an intuitive interface. It includes large, glove-friendly buttons that simplify operation, even with riding gloves on. The modular design of the Q2 allows for easy installation on various helmet types, making it a versatile choice for riders with different preferences.

Additionally, the Q2 supports music sharing and can connect to smartphones via Bluetooth, enabling riders to enjoy their favorite playlists or podcasts while on the road. The ability to seamlessly switch between music and intercom communication gives riders the flexibility to customize their riding experience.

The battery life of the Cardo Q2 is another standout feature. With up to 13 hours of talk time on a single charge, riders can rely on the system for long journeys without the worry of battery depletion.

Built to withstand the elements, the Q2 is water-resistant, ensuring durability in adverse weather conditions. Overall, the Cardo Q2 combines cutting-edge technology with practical design, making it an essential tool for motorcyclists seeking enhanced communication and connectivity on their adventures.
Top Page Image Contents