Cardo Q2 manual Positioning the Speakers

Page 8

sure to clean the selected area prior to the gluing process).

4. Use the pre-moistened Towelette to clean the helmet area where

you want to install the Glue Plate. Allow to dry thoroughly.

POSITIONING THE SPEAKERS

5. Peel the foil cover from the Glue Plates’ adhesive pad.

6. Place the Glue Plate into position according to #3. Press firmly 15

seconds on all 3 parts of the Glue Plate.

7. The adhesive pad bonds to full strength over the next 24 hours.

Therefore it is recommended to not use the headset during this 24

hour period.

8. Fasten the Clamp to the Glue Plate using the Allen screws that were

previously removed.

If you have purchased a helmet clamp version with the corded microphone, please proceed as follows:

ATTACHING THE CORDED MICROPHONE CLAMP ON A FULL-FACED HELMET

If you are using the corded microphone version, you must first make sure your helmet clamp is attached to your

helmet as described in previous section

Attach the speakers to the Velcro inside your helmet opposite your ears (short speaker cord for the left ear [A] and the long speaker cord [B] for the right ear). You may want to use the supplied Velcro pad.

Using two speakers inside the helmet may be prohibited in certain jurisdictions. If this is the case,

you should tuck away the long corded speaker underneath the helmet padding as follows:

Lead the speaker cord [B] along- side the rim of the padding to the right side and then back

to the left side, near speaker

[A].Then place the speaker [B] underneath the padding.

Speaker A

Speaker B

Cable

Speaker B

Speaker B

(ATTACHING THE CLAMP ON THE HELMET). Clean the exact spot on the internal padding of the helmet, opposite your mouth, where the microphone will be placed and proceed as follows.

a. Peel the foil cover from the adhesive Velcro pad and place the Velcro pad on the chosen location opposite your mouth.

b. Attach the microphone to the Velcro, as shown in photo.

c. When done, tighten the screws of the clamp

Speaker A

ATTACHING AND REMOVING THE HEADSET FROM THE HELMET CLAMP

ATTACHING:

Slide the headset downwards along the sliding panel until a clicking sound indi- cates that the headset is locked in place.

8 scala rider® Q2™ MultiSet

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Q2 MultiSet Scala rider Q2 MultiSet Contents of Retail BOX IntroductionSET UP for BIKE-TO-BIKE Intercom Pairing Before Using Charging HeadsetSET UP and Configuration Reset Intercom Pairing Make sure that both headsets are now flashing slowly in BlueSET UP for Mobile Phone Calls Pairing To Pair the Scala Rider Q2 to a Bluetooth Mobile PhoneSET UP for Bluetooth GPS Device Pairing To Pair the Scala Rider Q2 to a Bluetooth GPS DeviceGlue Plate Method Attaching the Clamp on the HelmetStandard Method Positioning the Speakers Double tap the MC Button Using the HeadsetOr MC Button Connect Single tap the MC Button Enable/Disable Voice Connect feature Making and Receiving Mobile Phone CallsReceiving Intercom calls Short press the Ctrl Button to end a callStatus Light States Working with the FM RadioUsing the MP3 Player with Your Headset SupportSaving an FM Radio Station MP3 cableWaiver and General Release Return for Full Refund
Related manuals
Manual 14 pages 45.62 Kb

Q2 specifications

The Cardo Q2 is an innovative communication system designed specifically for motorcyclists, enhancing the riding experience through seamless connectivity and advanced features. Manufactured by Cardo Systems, a leader in the motorcycle communication industry, the Q2 sets the standard for rider intercom technology with its robust functionality and user-friendly design.

One of the main features of the Cardo Q2 is its ability to facilitate intercom communication between riders. The system utilizes Bluetooth technology to connect with other Q2 units or compatible devices, allowing for clear and reliable communication over distances of up to 1.6 kilometers (approximately one mile). This range is particularly beneficial for group rides, ensuring that all participants can keep in touch without the need for cumbersome hand signals or stopovers.

The Q2 is equipped with advanced noise cancellation technology, significantly reducing the sound of wind and road noise, which can often interfere with communication. This feature is crucial for maintaining clear audio quality, allowing riders to communicate at high speeds and in varying weather conditions without distraction.

In terms of usability, the Cardo Q2 boasts an intuitive interface. It includes large, glove-friendly buttons that simplify operation, even with riding gloves on. The modular design of the Q2 allows for easy installation on various helmet types, making it a versatile choice for riders with different preferences.

Additionally, the Q2 supports music sharing and can connect to smartphones via Bluetooth, enabling riders to enjoy their favorite playlists or podcasts while on the road. The ability to seamlessly switch between music and intercom communication gives riders the flexibility to customize their riding experience.

The battery life of the Cardo Q2 is another standout feature. With up to 13 hours of talk time on a single charge, riders can rely on the system for long journeys without the worry of battery depletion.

Built to withstand the elements, the Q2 is water-resistant, ensuring durability in adverse weather conditions. Overall, the Cardo Q2 combines cutting-edge technology with practical design, making it an essential tool for motorcyclists seeking enhanced communication and connectivity on their adventures.
Top Page Image Contents