Making and answering calls
Answering calls | 1. | When your telephone rings, lift your handset. |
|
| You are immediately connected to the call. |
|
| |
Making external calls | Depending upon the dialling mode programmed for your | |
| telephone, you may be able to dial your call before lifting your | |
| handset. | |
| 1. | Pick up the handset. |
| 2. | Dial â(your system’s exchange line access code or a line |
|
| pool access code). |
| 3. | Dial the external telephone number. |
|
|
|
Making internal calls | 1. | Pick up the handset. |
| 2. | Dial the internal number. |
|
| |
| Note: Extension numbers and the exchange line access code | |
| are supplied by your System Administrator. | |
|
| |
Making or answering a | The M7100 telephone allows you to have two calls active at | |
second call | the same time. | |
| You can switch between calls using œ. | |
To answer a second call while on another call
1.Press œto put the first call on hold.
The second call automatically comes onto the line.
To hold a call and make a second call
1.Press œto put the first call on hold.
2.Dial the telephone number for the second call.
To return to the first call
1.Press œagain to return to the first call on hold.
The second call is automatically put on hold.
œTo hold a call
1.Press œ.
2.Press œagain to return to the call on hold.
Check the display for confirmation or additional information.
Note: If you have difficulty selecting a line on your M7100 telephone, ask your System Administrator to check your telephone's programming. Your telephone must be assigned to use an exchange line or line pool.
Page 2 Enterprise Edge M7100 Quick Reference Guide