Panasonic KX-TG4312BX, KX-TG4311BX Error messages, Display message Cause/solution

TG4311BX.book Page 33 Monday, November 10, 2008 9:32 AM

Useful Information

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

Display message	Cause/solution
Busy	L The called handset is in use.*1
	L Another handset is in use and the system is
or		busy. Try again later.*1
System is busy. Please	L The handset you are using is too far from the
		base unit. Move closer and try again.
try again later.	L The handset’s registration may have been
		canceled. Re-register the handset (page 38).
Check tel line	L The supplied telephone line cord has not been
		connected yet or not connected properly.
		Check the connections (page 9).
Dial locked	L Dial lock is turned on. To turn it off, see page
	16.
Don’t use this battery.	L A wrong type of batteries such as Alkaline or
		Manganese was inserted. Use only the
		rechargeable Ni-MH batteries noted on page
	4, 10.
Error!!	L The handset’s registration has failed. Move
		the handset and base unit away from all
		electrical appliances and try again.
	L The entered password was wrong in
		programming dial lock. Enter the correct
		password.
Insert battery	L The handset was placed on the base unit or
		charger without batteries. Insert the batteries
		properly (page 10).
Invalid	L There is no handset registered to the base
		unit matching the handset number you
		entered.*1
	L The handset’s registration may have been
		canceled. Re-register the handset (page 38).
No link to base.	L The handset has lost communication with the
Reconnect AC adaptor.		base unit. Move closer to the base unit and try
		again.
	L Unplug the base unit’s AC adaptor to reset the
		unit. Reconnect the adaptor and try again.
	L The handset’s registration may have been
		canceled. Re-register the handset (page 38).
	33