TG4311BX.book Page 13 Monday, November 10, 2008 9:32 AM
Preparation
Setting up the unit before use
Dialing mode
If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”. “Tone”: For tone dial service. “Pulse”: For rotary/pulse dial service.
1{MENU} i{#}{1}{2}{0}
2{V}/{^}: Select the desired setting.
3{Save} i{OFF}
Date and time
1{MENU} i{#}{1}{0}{1}
2Enter the current date, month, and year by selecting 2 digits for each. Example: 15 July, 2008
{1}{5} {0}{7} {0}{8}
3Enter the current hour and minute
Example: 9:30
{0}{9} {3}{0}
4{AM/PM}: Select “AM” or “PM”.
5{Save} i{OFF}
Note:
LTo correct a digit, press {^}, {V}, {<}, or {>} to move the cursor to the digit, then make the correction.
L The date and time may be incorrect after a power failure. In this case, set the date and time again.
13
