TG4311BX.book Page 21 Monday, November 10, 2008 9:32 AM
Programming
Programming using the direct commands
1{MENU} i{#}
2Enter the desired feature code.
3Enter the desired setting code. i{Save}
L This step may vary depending on the feature being programmed. L To exit the operation, press {OFF}.
Note:
L In the following table, < > indicates the default settings.
Feature | Feature | Setting code | System | Page |
| code |
| setting*1 |
|
Auto talk*2 | {2}{0}{0} | {1}: On {0}: <Off> | – | 14 |
Date and time | {1}{0}{1} | – | r | 13 |
Deregistration | {1}{3}{1} | – | – | 38 |
Dial lock | {2}{5}{1} | – | r | 16 |
HS | {1}{3}{0} | – | – | 38 |
registration |
|
|
|
|
(Handset |
|
|
|
|
registration) |
|
|
|
|
Key tone*3 | {1}{6}{5} | {1}: <On> {0}: Off | – | – |
LCD contrast | {1}{4}{5} | – | – | |
(Display contrast) |
|
|
|
|
Night mode | {2}{3}{8} | {1}: On {0}: <Off> | – | 23 |
(On/Off) |
|
|
|
|
Night mode | {2}{3}{7} | <11:00 PM/06:00 AM> | – | 23 |
(Start/End) |
|
|
|
|
Ringer tone*4 | {1}{6}{1} | – | – | |
(Handset) |
|
|
| |
Ringer volume | {1}{6}{0} | {1}: Low {2}: Medium | – | – |
(Handset) |
| {3}: <High> {0}: Off |
|
|
Set alarm | {7}{2}{0} | {1}: Once {2}: Daily | – | 23 |
|
| {0}: <Off> |
|
|
Set area code | {2}{5}{5} | – | r | 26 |
Set dial mode | {1}{2}{0} | {1}: Pulse {2}: <Tone> | r | 13 |
Set flash | {1}{2}{1} | {1}: <700ms> {2}: 600ms | r | 15 |
time*5 |
| {3}: 400ms {4}: 300ms |
|
|
|
| {5}: 250ms {6}: 110ms |
|
|
|
| {7}: 100ms {8}: 90ms |
|
|
Set line mode*6 | {1}{2}{2} | {1}: A {2}: <B> | r | – |
21
