TG4311BX.book Page 19 Monday, November 10, 2008 9:32 AM
Programming
Programmable settings
You can customize the unit by programming the following features using the handset. To access the features, there are 2 methods:
–scrolling through the display menus (page 19)
–using the direct commands (page 21)
L Mainly the direct command method is used in these operating instructions.
Programming by scrolling through the display menus
1{MENU}
2Press {V} or {^} to select the desired main menu. i{Select}
3Press {V} or {^} to select the desired item in
4Press {V} or {^} to select the desired setting. i{Save}
L This step may vary depending on the feature being programmed. L To exit the operation, press {OFF}.
Note:
L See page 21 for the default settings.
Main menu |
| Page | |
Night mode | On/Off | – | 23 |
| Start/End | – | 23 |
Ringer setting | Ringer volume | – | – |
| Ringer tone | – | – |
Set date & time | Date and time*1 | – | 13 |
| Alarm | – | 23 |
| Time adjustment*1, *2 | – | – |
Dial lock*1 | – | – | 16 |
Initial setting | LCD contrast | – | – |
| Key tone | – | – |
| Auto talk | – | 14 |
| Set area code*1 | – | 26 |
| Set tel line | Set dial mode*1 | 13 |
|
| Set flash time*1 | 15 |
|
| Set line mode*1 | – |
| Registration | HS registration | 38 |
|
| Deregistration | 38 |
19
