Williams Sound TEL 040 user manual Installation Steps

Page 6

Installation Guide & User Manual

TELETALKER™ Model TEL 040

Installation Steps

Step 1: Make sure you have a 115 VAC wall outlet and tele- phone jack within 6 feet of the place you’ve chosen to install the telephone. If you have an older 4-prong jack, you’ll need a modular jack adapter. These adapters are available from electronic, phone, and other retail stores.

Step 2: Place the Pulse/Tone Switch, located on the side of the phone, in either Tone or Pulse (Rotary Dial Pulse). Make sure you choose the correct dialing mode. Tone dialing will not work if you have only dial pulse (rotary) service.

fig. 2: Pulse/Tone Switch

Pulse / Tone Switch

Switches between touch-tone and rotary dial modes.

TO TEL. LINE

AC 12 V/0.85A

PULSE TONE

Step 3: Set Ringer Volume and Tone Controls to desired level. (see fig.3)

fig. 3: Ringer Controls

 

 

HI

I

II

III

 

LO

 

TONE

OFF

RINGER

 

 

 

RINGER

 

 

 

 

Ringer Volume Control

Ringer Tone Control

Adjusts ringer volume (Hi, Lo, Off)

Adjusts ringer pitch (I, II, III)

Step 4: Plug the coiled handset cord into the handset. Plug the other end into the telephone base. (see fig. 4)

fig. 4: Handset Connection

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Teletalker Important Safety Information Recycling InstructionsTable Of Contents Features & Functions IntroductionComponents Teletalker Installation Steps Set Ringer Volume and Tone Controls to desired level. seeFor Table/Desk Installations Power ConnectionFor Wall Plate Installations Wall InstallationTeletalker Model TEL Bare Wall Installation Using The Amplify Function Teletalker OperationMaking a Call Using the Teletalker With a Hearing Aid Answering a CallCase Of Difficulty Neckloop will not work with the Teletalker FCC Registration Notice Interference Information Part 15 Of FCC RulesLimited Warranty Specifications Teletalker Amplified Telephone, Model TEL
Top Page Image Contents