Nortel Networks LIP-6830 manual Redial, Last Call Return, Speed Dial Buttons

LIP-6830 User Guide

receive a call waiting tone and the caller’s number is displayed so you know who is calling before you interrupt the current call; you can choose to pick up the call, or ignore it.

To answer a second call:

1) Press [Answ] Softkey; the first call is automatically placed on hold.

To place a second call:

1)Place the active call on hold.

2)Press [NewC] Softkey to obtain dial tone, and dial the destination phone number.

NOTE: When you have two calls on a Line, you are able to toggle between the two calls with the Line button. Pressing the Line button for the calls, you can move from one to the other call and manage the selected call. If you select an idle Line and take no action after 5 seconds, you will be returned to the original call.

2.9Redial

You can automatically redial the last number you dialed; pressing the [Redi] Softkey will activate the speakerphone or headset and dial the last dialed number. Lift the handset prior to pressing the [Redi] Softkey to connect the call to the handset rather than the Speakerphone.

To redial a call:

1) Press [Redi] Softkey.

NOTE: Your IP phone will not recall the last call dialed number after a loss of system power.

2.10Last Call Return

You can dial the number associated with the last incoming call, allowing you to return a call to the caller.

To call back the last incoming caller:

1)Press [LCR ] Softkey.

2.11Speed Dial Buttons

Programmable buttons on the LIP-6830 can be assigned for Speed Dial; pressing the button will automatically select your Line and dial the stored number (refer to the Installer Guide for the steps to configure Speed Dial).

To make a call using speed dial:

1)Press the desired Speed Dial button, or lift the handset and press the desired Speed Dial button

8 June 07