Nortel Networks LIP-6830 manual Hotline/Warm-Line

LIP-6830 User Guide

Direct Station Selection (DSS) — one-touch calling to covered extensions, and the ability to pick up calls ringing at those extensions.

Busy Lamp Field (BLF)—visual status indication of covered extensions.

The DSS/BLF feature in the LIP-6830 uses the Shared call appearance feature. Operation of the DSS/BLF Coverage button however is distinctively different than a Shared Line.

To call an idle covered extension:

1)Lift the handset, press , press , or press your Line button.

2)Press the DSS/BLF Coverage button.

To answer a call to a covered extension:

1)Lift the handset, press , press , or press your Line button.

2)Press flashing DSS/BLF Coverage button.

The LED indications of the DSS Line button are:

Solid green	Line in use locally
Slow blinking green	Call held, locally
Solid red	Line in use remotely
Fast blinking red	Call appearance ringing for covered Line
Slow blinking red	Remote call hold

NOTE: To use the DSS/BLF feature, the Line button must be configured as DSS (refer to Installer Guide for the steps to configure the Line for DSS).

2.18Hotline/Warm-Line

The LIP Phone may be assigned for Hotline/Warm-Line operation. When assigned, the LIP Phone will automatically place a call to the assigned destination. For Hotline, the call is placed immediately upon an off-hook state. For Warm-Line, the call is placed after a delay, allowing the user time to access another feature or Line as needed.

11 June 07