Installation Type 3a, Installation Type 3b

Saab 9-3 (Front CDC)

Volvo XC90 - MY 2002-2006, with High Perfor- mance and Premium sound system,

without AUX input, with CDC

Installation Type 3a:

Vehicles with no existing CD changer

Set the DIP switches as shown below.

Audi (MMI-2 Basic Monochrome)

Text capable BMW E87, E90, E91, E92, E93, E60/61, E63/E64, E65/E66 (03/2005-), E70

and Mini (non iDrive-4)

Non text capable BMW E65/E66 (-03/2005) (non iDrive-4)

Installation Type 3b:

If you are installing to a free fibre optic connector in the car (CDC preparation) use this method:

Text Configuration

Saab & Mercedes vehicles require final configuration of the Gateway as i not all of the radios in these vehicles support text display. After Gateway 500 has been installed, toggle the mode selector switch six times (three times on/off) and a configuration menu will appear on the radio display. Select the configuration mode according to your head unit listed in the configuration table. To confirm the selection press and hold

Installation Type 2b:

Volvo S40/V50 - MY 2004-2007 with Basic and High Performance sound system, without AUX in- put, with CDC

BMW E90, E91, E92, E93 with iDrive-4

Use a CDC for enabling

Mercedes (NTG1-, NTG2- Audio 20/50 and

Comand)

Porsche (CDR 23/24 and PCM I/II/2.1)

Car side

; to discard the selection press and hold

Track #	Config	Mercedes	Saab
		Command	Text

# 1	NO TEXT	D	D

# 2	Timeout	-	-

CDR	PCM
Saab 9-3 (Rear CDC)
Saab 9-3 (Front CDC)

				If you are connecting Gateway 500 to the back


Car side				of the head unit, use this diagram:
				of the head unit, use this diagram:

ICM

(Display)

Car side

# 3	Text	-	-

# 4	+Cache	-	-

# 5	+Paging	R	R

# 6	+Select	-	R

D: Default, R: Recommended

For detailed information visit:

http://support.dension.com

LED

When servicing your vehicle

You must set the mode selector switch to service mode (bypass, CD Changer) i position otherwise the service computer may detect an unknown device in the fibre optic system which

can lead to errors reported.

The LED (arrowed) indicates

Service/CDC the current operating mode mode

ò = GW5 (Blue LED Solid) ö = Service/CDC

(Blue LED Flashing)

LED