| 3. Check with your supplier if firmware filename is correct. |
|
|
I accidentally set DSL to | 1. Unplug the power cord from the IP phone. Wait 2 seconds |
enable and now the phone | and plug the power cord back in the IP phone. Press and hold |
does not boot up | MENU key. The system should bypass boot up and go |
| |
| straight into phone setup menu. Modify the phone setting and |
| make sure you save it before you exit. |
|
|
Why do I get “Can’t Upgrade | 1. Make sure you exit setting mode (phonebook, menu, speed |
Now” screen when I click | dial…) before you click [Submit] in the configuration menu. |
[Submit] in the configuration |
|
menu? |
|
38