1
2
3
1.DSS keys (direct station selection) or CO keys (Central Office Lines)
2.Status Indicators
3.Dedicated Feature keys
General Information
The following should be considered when reviewing this user guide:
Attendant console keys can be assigned as Direct Station Selection/Busy Lamp Field (DSS/BLF), Call Arrival or as additional central office lines (CO
Refer to the Xen IPK Digital Telephone User Guide for additional information on telephone operation.
All operational instructions assume Prime Line Pickup is assigned to intercom dial tone, Ringing Line Preference is assigned, a Call Appearance and Call Arrival key is assigned to all multiline telephones and only a single tenant has been assigned in the system.
All access codes listed are standard; some may vary based on system assignment.
Access to many features is based on system assignments. Not all features may be available from your telephone.
The telephone display provides useful call processing information such as trunk access, recall indication, feature confirmation, etc.
DSS/BLF LEDs |
|
| |
Telephone Status | DSS/BLF Status | CO Line Status | LED Indication |
Attendant message | Steady Green | Idle | Unlit |
Idle | Unlit | Incoming call | Rapid Flashing Red |
In use | Steady Red | In use | Steady Green |
Hold | Steady Red | (by the attendant) |
|
FWD All (DND) | Flashing Red | Steady Red | |
|
| Held call |
|
|
| - Your telephone | Slow Flashing Green |
|
| - Other telephone | Slow Flashing Red |
|
|
|
|
1