NEC 2400IPX manual To Originate a Call Using Speed Calling INDIVIDUAL/GROUP

Page 18

TO VERIFY (WITH DTERM 8D/16D/32D)

◆Press Feature button.

◆Press desired Speed Dial button.

◆Display indicates digits programmed.

Note 1: To program a hook switch for transfer or feature activation, press Recall key as first digit. (! displays on LCD.)

Note 2: To program a pause, press the Recall key as any digit other than the first digit. (– displays on LCD.)

Note 3: To program a Voice Call, press Transfer key after dialing station number. (V displays on LCD.)

Note 4: Speed calling for feature access:

Speed call keys may use a feature key by storing the NEAX2400 IPX feature access code. The feature may be programmed on a system basis by the PBX engineer.

Access codes may be stored in conjunction with telephone numbers. For example, one button can be programmed by the user to transfer to a certain extension.

TO ORIGINATE A CALL USING SPEED CALLING (INDIVIDUAL/GROUP)

◆Press the Redial button.

◆ Press the desired	LNR[*]/SPD[ ]	-X
speed calling		XXXXXX
number.

18

Image 18

Contents Dterm NEC AMERICA, INC Table of Contents Keys and Lamps DND Do Not DisturbCall Indicator Lamp LCDSoft Keys Exit Key Help KeyMIC Microphone FDB Call Forwarding Busy FDA Call Forwarding All CallsPick Call Pickup Group CW Call WaitingHold Call Hold Conf Three-way CallingFlash Flash CAS CAS Switch Hook FlashSPD Speed Calling System FDN Call Forward No AnswerGpick Call Pickup Group Enhancement Hset HeadsetRLS Release Key Ckeep Eight-Party Conference RetrainDisplay Function Next Terminal Setup with the UP/DOWN KEYChcnf Call Hold Conference Display Function PreviousTerminal Setup with the Feature KEY To change microphone statusPress Feature To set hands-free on To Originate AN Internal Call To Originate a Call Using Speed Calling ONE-TOUCH Buttons Multiline AppearanceTo Originate a Call Using Speed Calling INDIVIDUAL/GROUP To Originate a Call Using Speed Calling System KeyVoice Call Press Voice Speak to called partyTo Answer a Voice Call HANDS-FREE Automatic IntercomManual Intercom Dial Intercom Press Dicm keyTo Place a Call on Hold To Place a Call on Exclusive Hold Press Hold twiceTo Transfer a Call Conference Conf Soft KeyTo Establish a Broker Call Call PICK-UP Group Call PICK-UP DirectCalling party OFF-HOOK Trunk Queuing Last Number Redial Call Forwarding ALL Calls To Cancel Call Forwarding Busy LineForward SET is displayed Call Forwarding Busy Line is set Call Forwarding DON’T Answer 8D/16D/32D LCD displays Station Call Destination is canceled Do not Disturb OptionPage Index Page Page LCD Displays DDD Callpark SETForward Xxxx HANDS-FREE MSG Xxxx Hhmmpm Overridexxxx RCV VOL. SMALL/LARGE Voice BUSY/REST Face Layout LCDNOTE1DTERM16D 16-LINE with Display Dterm 32D 32-LINE with Display DTERM8 8-LINE NON Display FPO BAR Code