NEC 2400IPX manual Forward SET is displayed Call Forwarding Busy Line is set

Page 35

FORWARD CANCEL

(Time Display)

USING THE SOFT KEY

◆Press FDB Soft Key. Receive special dial tone.

◆Dial destination; wait for service set tone.

TO CANCEL

◆Press Speaker. Receive dial tone. If canceling for another station, press MULTILINE APPEARANCE.

◆“FORWARD SET” is displayed; Call Forwarding – Busy Line is set.

FORWARD SET

(Time Display)

MIC>>>

◆ Press FWD-BYor dial “Call Forwarding – Busy

Line” cancel code. Receive service set tone. LED goes out at your station (or the Dterm of

TO VERIFY (WITH DTERM 8D/16D/32D)

◆Press FWD-BY.

◆Display indicates the station number calls are forwarded to.

Note 1: If recipient		Forwarding station
station is a Dterm	FORWARD	2000
8D/16D/32D,	(Time Display)
LCD displays:

Note 2: With Soft Key operation, FDB flashes on the display.

the multiline station).

◆Press Speaker. Call Forwarding – Busy Line is cancelled.

USING THE SOFT KEY

◆Press FDB Soft Key.

◆ Receive service set	FORWARD CANCEL
tone and	(Time Display)	>>>
“FORWARD	MIC	>>>
“FORWARD

CANCEL” is displayed.

40

Image 35

Contents Dterm NEC AMERICA, INC Table of Contents DND Do Not Disturb Keys and LampsLCD Call Indicator LampSoft Keys MIC Microphone Exit KeyHelp Key FDA Call Forwarding All Calls FDB Call Forwarding BusyConf Three-way Calling CW Call WaitingHold Call Hold Pick Call Pickup GroupFDN Call Forward No Answer CAS CAS Switch Hook FlashSPD Speed Calling System Flash FlashCkeep Eight-Party Conference Retrain Hset HeadsetRLS Release Key Gpick Call Pickup Group EnhancementDisplay Function Previous Terminal Setup with the UP/DOWN KEYChcnf Call Hold Conference Display Function NextTo change microphone status Terminal Setup with the Feature KEYPress Feature To set hands-free on To Originate AN Internal Call Multiline Appearance To Originate a Call Using Speed Calling ONE-TOUCH ButtonsTo Originate a Call Using Speed Calling INDIVIDUAL/GROUP Key To Originate a Call Using Speed Calling SystemPress Voice Speak to called party Voice CallAutomatic Intercom To Answer a Voice Call HANDS-FREEManual Intercom Press Dicm key Dial IntercomTo Place a Call on Hold Press Hold twice To Place a Call on Exclusive HoldTo Transfer a Call Conf Soft Key ConferenceTo Establish a Broker Call Call PICK-UP Direct Call PICK-UP GroupCalling party OFF-HOOK Trunk Queuing Last Number Redial Call Forwarding ALL Calls Call Forwarding Busy Line To CancelForward SET is displayed Call Forwarding Busy Line is set Call Forwarding DON’T Answer 8D/16D/32D LCD displays Station Call Destination is canceled Option Do not DisturbPage Index Page Page DDD Callpark SET LCD DisplaysForward Xxxx HANDS-FREE MSG Xxxx Hhmmpm Overridexxxx RCV VOL. SMALL/LARGE Voice BUSY/REST LCDNOTE1 Face LayoutDTERM16D 16-LINE with Display Dterm 32D 32-LINE with Display DTERM8 8-LINE NON Display FPO BAR Code