NEC 2400IPX manual Call Forwarding Busy Line, To Cancel

Page 34

FORWARD CANCEL

(Time Display)

TO CANCEL

◆Press Speaker. Receive dial tone. If cancelling for another station, press MULTILINE APPEARANCE.

◆ Press FWD or dial “Call Forwarding – All Calls” cancel

code. Receive service set tone. LED goes out at your station (or the Dterm of the multiline station).

◆Press Speaker. Call Forwarding – All Calls is cancelled.

USING THE SOFT KEY
◆ Press FDA Soft Key.
◆ Receive service set
◆ Receive service set	FORWARD CANCEL
tone and	FORWARD CANCEL
tone and	(Time Display)
“FORWARD	MIC	>>>
CANCEL” is
displayed.

CALL FORWARDING – BUSY LINE

TO SET

◆Press Speaker. Receive dial tone.

◆If setting for another station, press

MULTILINE APPEARANCE.

◆Press FWD-BYor dial “Call Forwarding – Busy Line” access code. Receive special dial tone.

◆Dial destination station or external telephone number. Receive service set tone.

◆FWD LED lights (at your station or at the Dterm of the multiline station you are setting).

◆ Press Speaker.	FORWARD SET
Call Forwarding –	(Time Display)
Busy Line is set.

39

Image 34

Contents Dterm NEC AMERICA, INC Table of Contents Keys and Lamps DND Do Not DisturbCall Indicator Lamp LCDSoft Keys Help Key Exit KeyMIC Microphone FDB Call Forwarding Busy FDA Call Forwarding All CallsPick Call Pickup Group CW Call WaitingHold Call Hold Conf Three-way CallingFlash Flash CAS CAS Switch Hook FlashSPD Speed Calling System FDN Call Forward No AnswerGpick Call Pickup Group Enhancement Hset HeadsetRLS Release Key Ckeep Eight-Party Conference RetrainDisplay Function Next Terminal Setup with the UP/DOWN KEYChcnf Call Hold Conference Display Function PreviousTerminal Setup with the Feature KEY To change microphone statusPress Feature To set hands-free on To Originate AN Internal Call To Originate a Call Using Speed Calling ONE-TOUCH Buttons Multiline AppearanceTo Originate a Call Using Speed Calling INDIVIDUAL/GROUP To Originate a Call Using Speed Calling System KeyVoice Call Press Voice Speak to called partyTo Answer a Voice Call HANDS-FREE Automatic IntercomManual Intercom Dial Intercom Press Dicm keyTo Place a Call on Hold To Place a Call on Exclusive Hold Press Hold twiceTo Transfer a Call Conference Conf Soft KeyTo Establish a Broker Call Call PICK-UP Group Call PICK-UP DirectCalling party OFF-HOOK Trunk Queuing Last Number Redial Call Forwarding ALL Calls To Cancel Call Forwarding Busy LineForward SET is displayed Call Forwarding Busy Line is set Call Forwarding DON’T Answer 8D/16D/32D LCD displays Station Call Destination is canceled Do not Disturb OptionPage Index Page Page LCD Displays DDD Callpark SETForward Xxxx HANDS-FREE MSG Xxxx Hhmmpm Overridexxxx RCV VOL. SMALL/LARGE Voice BUSY/REST Face Layout LCDNOTE1DTERM16D 16-LINE with Display Dterm 32D 32-LINE with Display DTERM8 8-LINE NON Display FPO BAR Code