NEC 2400IPX manual Call Forwarding DON’T Answer

Page 36

CALL FORWARDING – DON’T ANSWER

TO SET

◆Press Speaker. Call Forwarding – Don’t Answer is set.

USING THE SOFT KEY

	Forwarding
	station
FORWARD SET	2000
(Time Display)

◆ Press Speaker. Receive dial tone.

◆ If setting for another station, press MULTILINE

APPEARANCE.

◆Press FDN Soft Key. Receive special dial tone.

◆Dial destination; wait for service set tone.

◆ Press FWD-NAor dial “Call Forwarding –

Don’t Answer” access code. Receive special

dial tone.

◆ Dial destination station or external telephone

◆“FORWARD SET” is displayed; Call Forwarding – Don’t Answer is set.

FORWARD SET

(Time Display)

MIC>>>

number. Receive service set tone.

◆ FWD LED lights (at your station or at the

Dterm of the multiline station you are

setting).

TO VERIFY (WITH DTERM 8D/16D/32D)

◆If verifying for another station, press

MULTILINE APPEARANCE while idle.

◆Press FWD-NA.

41

Image 36

Contents Dterm NEC AMERICA, INC Table of Contents Keys and Lamps DND Do Not DisturbCall Indicator Lamp LCDSoft Keys Exit Key Help KeyMIC Microphone FDB Call Forwarding Busy FDA Call Forwarding All CallsCW Call Waiting Hold Call HoldPick Call Pickup Group Conf Three-way CallingCAS CAS Switch Hook Flash SPD Speed Calling SystemFlash Flash FDN Call Forward No AnswerHset Headset RLS Release KeyGpick Call Pickup Group Enhancement Ckeep Eight-Party Conference RetrainTerminal Setup with the UP/DOWN KEY Chcnf Call Hold ConferenceDisplay Function Next Display Function PreviousTerminal Setup with the Feature KEY To change microphone statusPress Feature To set hands-free on To Originate AN Internal Call To Originate a Call Using Speed Calling ONE-TOUCH Buttons Multiline AppearanceTo Originate a Call Using Speed Calling INDIVIDUAL/GROUP To Originate a Call Using Speed Calling System KeyVoice Call Press Voice Speak to called partyTo Answer a Voice Call HANDS-FREE Automatic IntercomManual Intercom Dial Intercom Press Dicm keyTo Place a Call on Hold To Place a Call on Exclusive Hold Press Hold twiceTo Transfer a Call Conference Conf Soft KeyTo Establish a Broker Call Call PICK-UP Group Call PICK-UP DirectCalling party OFF-HOOK Trunk Queuing Last Number Redial Call Forwarding ALL Calls To Cancel Call Forwarding Busy LineForward SET is displayed Call Forwarding Busy Line is set Call Forwarding DON’T Answer 8D/16D/32D LCD displays Station Call Destination is canceled Do not Disturb OptionPage Index Page Page LCD Displays DDD Callpark SETForward Xxxx HANDS-FREE MSG Xxxx Hhmmpm Overridexxxx RCV VOL. SMALL/LARGE Voice BUSY/REST Face Layout LCDNOTE1DTERM16D 16-LINE with Display Dterm 32D 32-LINE with Display DTERM8 8-LINE NON Display FPO BAR Code