Diagnostic error codes

Refer to the following diagnostic error codes when using the diagnostic tests. See

″Diagnostics″on page 9 for the specific type for information about the Diagnostic

programs.

In the following index, Xcan represent any number.

Diagnostic Error Code FRU/Action
000-000-XXX
BIOS TestPassed 1. No action
000-002-XXX
BIOS Timeout 1. Flash the system
2. System board
000-024-XXX
BIOS Addressing test failure 1. Flash the system
2. System board
000-025-XXX
BIOS Checksum Valueerror 1. Flash the system
2. Boot block
3. System board
000-026-XXX
FLASH data error 1. Flash the system
2. Boot block
3. System board
000-027-XXX
BIOS Configuration/Setup error 1. Run Setup
2. Flash the system
3. Boot block
4. System board
000-034-XXX
BIOS BufferAllocation failure 1. Reboot the system
2. Flash the system
3. Run memory test
4. System board
000-035-XXX
BIOS Reset Condition detected 1. Flash the system
2. System board
000-036-XXX
BIOS Register error 1. Flash the system
2. Boot block
3. System board
000-038-XXX
BIOS Extension failure 1. Flash the system
2. Adapter card
3. System board
000-039-XXX
BIOS DMI data error 1. Flash the system
2. System board
000-195-XXX
BIOS Testaborted by user 1. Information
2. Re-start the test, if necessary
000-196-XXX
BIOS test halt, error threshold exceeded 1. Press F3 to review the log file
2. Re-start the test to reset the log file
72 HardwareMaintenance Manual