Diagnostic Error Code FRU/Action
086-196-XXX
Mouse Port interface test halt, error
threshold exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
086-197-XXX
Mouse Port interface test warning 1. Make sure the component that is called
out is connected and/or enabled
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test
086-198-XXX
Mouse Port interface test aborted 1. If a component is called out, make sure it
is connected and/or enabled
2. Flash the system and re-test
3. Go to the Undetermined problems
section
086-199-XXX
Mouse Port interface test failed, cause
unknown
1. Go to the Undetermined problems
section
2. Flash the system and re-test
3. Replace component under function test
089-000-XXX
Microprocessor TestPassed 1. No action
089-XXX-XXX
Microprocessor failure 1. Microprocessor(s)
2. System board
089-195-XXX
Microprocessor Testaborted by user 1. Information
2. Re-start the test, if necessary
089-196-XXX
Microprocessor test halt, error threshold
exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
089-197-XXX
Microprocessor test warning 1. Make sure the component that is called
out is connected and/or enabled
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test
089-198-XXX
Microprocessor test aborted 1. Flash the system and re-test
2. Go to the Undetermined problems
section
089-199-XXX
Microprocessor test failed, cause unknown 1. If a component is called out, make sure
it is connected and/or enabled
2. Go to the Undetermined problems
section
3. Flash the system and re-test
4. Replace component under function test
170-000-XXX
VoltageSensor(s) Test Passed 1. Noaction
170-0XX-XXX
VoltageSensor(s) failure 1. Flash system
2. System board
86 HardwareMaintenance Manual