2. Tolocate the DIMM connectors. See “Identifying parts on the system board -
desktop model”on page 35.
3. Open the retaining clips.
4. Make sure the notches in the DIMM align with the tabs on the connector.Push
or insert the DIMM straight down into the connector until the retaining clips
close.
Notches
What to do next:
vTowork with another option, go to the appropriate section.
vTocomplete the installation, go to “Replacing the cover and connecting the
cables - desktop model”on page 43.
Installing adapters - desktop model
This section provides information and instructions for installing and removing
adapters. Yourcomputer has three expansion slots for peripheral component
interconnect (PCI) adapters. Youcan install an adapter up to 330 mm (13 inches)
long.
Toinstall an adapter:
1. Remove the cover. See “Removing the cover - desktop model”on page 34.
Chapter4. Installing Options 37