1. Remove the cover. See “Removing the cover - small desktop model”on
page26.
2. Tolocate the DIMM connectors. See “Identifying parts on the system board -
small desktop model”on page 27.
3. Open the retaining clips.
4. Make sure the notches in the DIMM align with the tabs on the connector.Push
or insert the DIMM straight down into the connector until the retaining clips
close.
Notches
What to do next:
vTowork with another option, go to the appropriate section.
vTocomplete the installation, go to “Replacing the cover and connecting the
cables - small desktop model”on page 33.
Installing adapters - small desktop modelThis section provides information and instructions for installing and removing
adapters. Yourcomputer has three expansion slots for low profile peripheral
component interconnect (PCI) adapters.
Toinstall an adapter:
1. Remove the cover. See “Removing the cover - small desktop model”on
page26.
Chapter4. Installing Options 29