3. Move the recovery jumper from normal to ROM recovery.
4. Power-on the computer.The system senses the change in the position and
erases the password.
5. Wait30 seconds for beeps to sound, and then power down by holding the
power button for 10 seconds.
6. Return the jumper to normal position.
7. Reset the date and time and remind the user to enter a new password when
service is complete.

Administrator password

The administrator password is used to restrict access to the Configuration/Setup
Utility program. If the administrator password is activated, and you do not enter
the administrator password, the configuration can be viewed but not changed.
Note:
Types2254, 2256, 2257, 6336, 6337, 6339, 6341, 6342, 6346, 6347, 6438 have Enhanced
Security Mode. If Enhanced Security mode is enabled and there is no password given, the
computer will act as if Enhanced Security is disabled.
If Enhanced Security is Enabled and an administrator password is given, the administrator
password must be entered to use the computer.If the administrator password is lost or
forgotten, the system board in the computer must be replacedin order to regain access to
the Configuration/Setup Utility program.

Administrator password control

The Administrator password is set in the Setup Configuration. Refer to Setup
Utility programon page 10.

Operating system password

An operating system password is very similar to a power-on password and denies
access to the computer by an unauthorized user when the password is activated.
The computer is unusable until the password is entered and recognized by the
computer.
Vital product data
Each computer has a unique Vital Product Data (VPD) code storedin the
nonvolatile memory on the system board. After you replace the system board,the
VPD must be updated. Toupdate the VPD, see Flash (BIOS/VPD) update
procedureon page 200.
Management Information Format (MIF)
Management Information Format (MIF) is a file used to maintain a list of the
system unit serial number along with all serialized components (for example,
system board, riser card, memory,and processor).
At the time of computer manufacture, the EPROM will be loaded with the serial
numbers of the system and all major components. The customer will have access to
the MIF file via the DMI MIF Browser that is installed with the preload and is also
available on the SSCD that is provided with the system.
A company called Retain-a-Group is a central data warehouseoffering serial
number data management. Retain-a-Group acts as a focal point to law
enforcement. The customer has the option to purchase serial number information
198 HardwareMaintenance Manual