NEC NEAX 2000 IVS2 specifications Called Party Recognition Service DIRECT-IN Termination DIT

Page 11

CALLED PARTY RECOGNITION SERVICE (DIRECT-IN TERMINATION (DIT))

CALLED PARTY RECOGNITION SERVICE

(DIRECT-IN TERMINATION (DIT))

General Description

This feature provides an incoming Direct-In Termination (DIT) call via an ISDN trunk to be connected to a pre- determined station. This application can be used for a station or modem.

Operating Procedure

No manual operation is required.

Station Application

All stations.

Service Conditions

1.For incoming calls in a Primary Rate Interface trunk, this service feature should be used only when DID trunks are not desired.

2.Refer to the Business Features and Specifications manual for details on service conditions.

Page 2

NEAX2000 IVS2 ISDN Features and Specifications

NDA-24273, Issue 1.0

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Isdn Features and Specifications Liability Disclaimer NEAX2000 IVS2 NEAX2000 IVS2 Business Feature List Supported Network Services Trunk PRE-PROVISIONED only Isdn Network Requirements for Layer ONE Table of Features This page is for your notes General Description CALL-BY-CALL Service SelectionCalled Party Recognition Service DIRECT-IN Termination DIT PBX DTI Isdn CPN to NETWORK-PRESENTElapsed time CPN to Terminating USER-DISPLAYDid Addressing Did and DOD Addressing Event Based Ccis Service Feature Availability Remarks Event Based Ccis Isdn Terminal Isdn Terminal Isdn Terminal Megacom ACCESS/WATS Megacom 800 SERVICE/800 Wats Ultra Wats Multiquest /900 Service SUBADDRESS-PRESENT Trunk Provisioning Service Selection This page is for your notes Appendix a Dterm Fixed Function Keys Appendix B Dterm LCD Displays
Top Page Image Contents