NEC NEAX 2000 IVS2 specifications Did and DOD Addressing

Page 15

DID AND DOD ADDRESSING

DID AND DOD ADDRESSING

General Description

This feature allows the system to use DID and DOD on the same B channels. Trunk Provisioning Service Selection is not required. (B-channels can be used for DID and DOD without separating the trunk routes.)

B-channels

PRI

D-channel

Operating Procedure

No manual operation is required.

Service Conditions

1.Confirm the DID and DOD selection with the customer’s local exchange carrier prior to installation.

2.For more details, refer to “Direct Inward Dialing” and “Direct Outward Dialing” in the Business Features and Specifications manual.

3.The DID/DOD is supported without service provisioning, since no facility indication to the network is required.

Page 6

NEAX2000 IVS2 ISDN Features and Specifications

NDA-24273, Issue 1.0

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Isdn Features and Specifications Liability Disclaimer NEAX2000 IVS2 NEAX2000 IVS2 Business Feature List Supported Network Services Trunk PRE-PROVISIONED only Isdn Network Requirements for Layer ONE Table of Features This page is for your notes General Description CALL-BY-CALL Service SelectionCalled Party Recognition Service DIRECT-IN Termination DIT PBX DTI Isdn CPN to NETWORK-PRESENTElapsed time CPN to Terminating USER-DISPLAYDid Addressing Did and DOD Addressing Event Based Ccis Service Feature Availability Remarks Event Based Ccis Isdn Terminal Isdn Terminal Isdn Terminal Megacom ACCESS/WATS Megacom 800 SERVICE/800 Wats Ultra Wats Multiquest /900 Service SUBADDRESS-PRESENT Trunk Provisioning Service Selection This page is for your notes Appendix a Dterm Fixed Function Keys Appendix B Dterm LCD Displays
Top Page Image Contents