NEC NEAX 2000 IVS2 specifications Did Addressing

Page 14

DID ADDRESSING

DID ADDRESSING

General Description

This feature allows incoming ISDN-PRI calls to terminate to stations, ATTCON, Automated Attendant, etc., based on the Called Party number. Direct Inward Dial trunks will be terminated to preprogrammed destinations without Attendant assistance.

Operating Procedure

No manual operation is required.

Station Application

Not applicable.

Service Conditions

1.If the network is notified that the destination station for the DID call is busy or a connection-controlled station, the network gives the calling station a Busy Tone. (This depends upon call forwarding services being in service.)

2.If the called station is nonexistent, the DID call can be routed to the Attendant Console, another predesignated station, or to receive Reorder Tone.

3.Refer to the Business Features and Specifications manual for more details of DID service.

NEAX2000 IVS2 ISDN Features and Specifications

Page 5

NDA-24273, Issue 1.0

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Isdn Features and Specifications Liability Disclaimer NEAX2000 IVS2 NEAX2000 IVS2 Business Feature List Supported Network Services Trunk PRE-PROVISIONED only Isdn Network Requirements for Layer ONE Table of Features This page is for your notes CALL-BY-CALL Service Selection General DescriptionCalled Party Recognition Service DIRECT-IN Termination DIT CPN to NETWORK-PRESENT PBX DTI IsdnCPN to Terminating USER-DISPLAY Elapsed timeDid Addressing Did and DOD Addressing Event Based Ccis Service Feature Availability Remarks Event Based Ccis Isdn Terminal Isdn Terminal Isdn Terminal Megacom ACCESS/WATS Megacom 800 SERVICE/800 Wats Ultra Wats Multiquest /900 Service SUBADDRESS-PRESENT Trunk Provisioning Service Selection This page is for your notes Appendix a Dterm Fixed Function Keys Appendix B Dterm LCD Displays
Top Page Image Contents