ISDN TERMINAL
ISDN TERMINAL
General Description
This feature provides the system with an ISDN Terminal or Terminal Adapter (TA). ISDN Terminal to ISDN Terminal, ISDN Terminal to ISDN Trunk, ISDN Trunk to ISDN Terminal, ISDN Terminal to Single Line Telephone, ISDN Terminal to Multiline Terminal, and ISDN Terminal to PS connections are available.
Operating Procedure
No manual operation is required.
Service Conditions
1.The ISDN Line Circuit (ILC) card and the ISDN Channel handler (ICH) card are required.
2.The ISDN Terminal must be locally powered.
3.The following connections are available:
•Point to Point connection
•Point to Multipoint connection
•National ISDN 1
4.The following features are available:
•Individual Terminal Calling (Point to Multipoint connection)
•Group Calling (Point to Multipoint connection)
•Called Party Recognition Service (DIT)
•DID Addressing
•DID and DOD Addressing
•CPN to
•CPN to Terminating
•Sub
•Direct Outward Dialing (DOD)
•Restriction from outgoing call
•Toll restriction
•Station to Station Calling
•Station Hunting
•Simultaneous voice and data transmission
•Asynchronous Data Switching
•Synchronous Data Switching
•Half/Full Duplex Switchover
5.The ISDN Terminal can provide Voice and data communication via the CCIS network. The CCIS network must be digital.
Page 10 | NEAX2000 IVS2 ISDN Features and Specifications |