14
Message window
Answering System Operation
Message window displays
The message window usually displays the total number of memos and incoming messages. See the list below for explanations of other displays in this window.
Message window displays
0 | No messages. |
Number of messages/memos, or message number | |
| currently playing (flashes if you have new mes- |
| sages). |
|
|
Current remote access code while setting | |
| (see page 26). |
|
|
Current volume level while adjusting. | |
Elapsed time while recording a memo (see page 28) | |
| or announcement up to 90 seconds (page 24). |
99 (flashing) | Memo recording exceeded maximum time of 99 |
| seconds. |
F (flashing) | Memory is full. Messages must be deleted before |
| new messages can be received. |
CL (flashing) | Clock needs to be set (see page 23). |
|
|
A | Announce only mode is on (see page 25). |
|
|
System is answering a call, or being accessed | |
| remotely. |
|
|
System is being programmed or initialized. | |
On (or) OF | Displayed for one second when any answering |
| system setting is turned on or off. |
29