Using your Response 15
To set
the volume
The message playback volume can be set to a level suitable for you.
Press + to increase the volume.
volume +
Press - to decrease the volume.
As you press, a beep sounds at the level you are selecting. When the volume is at its highest or lowest you will hear 2 beeps.
Beep!
8
If you alter the volume during playback of a message, the beep does not sound but the volume will change accordingly.
If the volume is below
To record your
outgoing message
The outgoing message is the message a caller hears when your Response 15 answers a call.
The Response 15 has
a
Hello, your call cannot
be taken at the moment, so please leave your message after the tone.
You can record your own outgoing message to replace the pre- recorded message.
If you record your own message, the pre- recorded message will be automatically removed and stored in the memory, in case you wish to reinstate it.
Your Response 15 has a total recording capacity of 14 minutes. Any outgoing message you record can be up to 2 minutes long, but you should keep it short to allow more time for recording incoming calls.