1Press and hold the
ANSWER ON/OFF | To check the answer | ||
button. Your Response | delay setting | ||
15 will announce the |
| ||
current answer delay. |
| ||
skip | Time Saver | Press and hold the | |
answer |
| ANSWER ON/OFF | |
on/off |
| ||
|
| button. Your Response | |
|
| 15 will announce the | |
|
| current delay setting. | |
2 Keep holding the | skip | ||
ANSWER ON/OFF | |||
answer | |||
button. Your Response | |||
on/off | |||
15 will announce the |
| ||
answer delay |
| ||
options... |
|
| |
skip | Time Saver, 2, 3, | To receive incoming | |
4, 5, 6, 7, 8, 9 | messages | ||
| |||
|
| ||
answer
on/off
Two minutes is the maximum time allowed for each incoming message. If the maximum message length is reached, your Response 15 will announce, ‘Thank you for calling’ and disconnect the line. If the memory is full then it will announce. ÔMemory full, thank you for callingÕ and disconnect the line.
Your Response 15 can record up to a total recording time of 14 minutes. If the memory capacity is full, the LED display will flash rapidly and your answering
3When you hear your desired setting, release the ANSWER ON/OFF button. After 2 seconds your Response 15 will announce the new answer delay setting and then return to ‘answer on’ mode.
Answer delay,
skip | 4 rings |
| |
answer |
|
on/off |
|
Your Response 15 will automatically record an incoming message when it is connected to your phone socket and is set to ‘answer on’.
When your Response 15 has received new messages, the display LED will flash.
machine will not record further messages.
To play back
a message
Press the PLAY button. Your Response 15 will announce...
skip | You have x |
| messages. |
play | Message one. |
| |
memo |
|
12