To record your outgoing message speak clearly, 15 to 20cm from the
Your outgoing message may sound something like this: ‘Hello, I’m sorry I can’t take your call at present. If you would like to leave a message, please speak after the tone.’
Read all the steps before you begin recording.
1Press and hold the STOP button.
stop
Your Response 15 will beep with the display flashing...
messages | battery |
| low |
|
|
2Keep holding down the STOP button and say your message into the microphone.
stop
When you have finished speaking,
release the STOP button.
Your Response 15 will automatically play back your message, then beep to confirm the recording. It will then return to ‘answer on’ mode
Answer on
To
To check your
outgoing message
1Press and release the STOP button
stop
Your Response 15 will beep and play back your outgoing message. It will then beep again and return to ‘answer on’ mode
messages | battery |
| low |
|
|
To delete your
outgoing message
You can delete your outgoing message and return to your Response 15’s pre- recorded outgoing message.
1Press and release the STOP button. Your outgoing message will be played back to you.
stop
2While the message is playing, press the DELETE button.
delete
Your Response 15 will beep and play its pre- recorded outgoing message.
Hello, your call cannot
be taken at the moment, so please leave your message after the tone.
Your own message has now been replaced by the Response 15’s original
9