Ameriphone operating instructions Placing TTY Calls, Dialing Manually from the Q90D Keyboard

Page 13

Installing and Using Your Q90D

Placing TTY Calls

Once the Q90D is in the LOCK OFF position, there are three (3) ways you can make a TTY call.

1.Dialing manually from the Q90D keyboard

2.Dialing automatically from the Q90D phone directory

3.Dialing from a digital cellular or cordless telephone

Dialing Manually from the Q90D

Keyboard

1.Press the Power key to turn ON the Q90D.The opening screen reads

AMERIPHONE Q90D DIGITAL TTY/VCO. If no other Function keys are pressed for two (2) seconds, the display changes to

OFF LINE.

2.Press F1 and type the phone number. As you type the number, the screen reads

PRESS RETURN TO DIAL.

3.If you make a mistake while typing, press Backspace to delete one space at a time. To abort an entire sequence, press ESC.

4.The message DIALING ENTERED NUMBER 1234567 is displayed on the screen.

5.If the line is not busy, SILENCE!!!! and RINGING will be displayed alternately while it is ringing.

6.If the other party answers by TTY, the SIGNAL light brightens and a greeting message is displayed on the screen. If the other party answers by voice, the SIGNAL light flickers. If Auto ID is on, the Q90D sends Baudot tones to tell the person you are calling that this is a TTY call.

7.If the line is busy, BUSY SIGNAL!!!! is

displayed and the red SIGNAL light (located above the F12 key) flashes quickly. Hold down CTRL and F1 to hang up which also causes the SIGNAL light to stop flashing.Try dialing again.

8.After the conversation is over, hold down CTRL and press Power to turn OFF the Q90D.To hang up and make another call, hold down CTRL and press F1.

9.Slide the LOCK to the ON position if moving the Q90D from one location to another.

Dialing Automatically from the

Q90D Phone Directory

1.To DIAL in this mode, you must first have names and telephone numbers stored in the directory. See Page 18 for an explanation of how to enter phone numbers into the directory.

2.Press the Power key to turn ON the Q90D.

3.Press F1 to enter DIAL mode and the following message is displayed on the

screen, ENTER NAME OR NUMBER OR

SELECT DIRECTORY WITH .

4.Type the name of the person you are calling, then press Return to enter your selection or press one of the Arrow keys to the left of the Power button until the desired name appears.

5.Then press Return to dial the directory number.

6.If the line is not busy, SILENCE!!!! and RINGING will be displayed alternately.

9

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Q90DTM Important Safety Instructions Additional Safety Notes for Canadian Users Safety Instructions Contents Package Checklist WarrantyFor Your Information Sales ReceiptAbout Your New Q90D Top Side FeaturesTop Side Back Side Right SideSetting Up Your Q90D Installing and Using Your Q90DInstalling the Batteries Power and Phone Line ConnectionTelephone Connections Lock SwitchDialing Manually from the Q90D Keyboard Placing TTY CallsDialing Automatically from Q90D Phone Directory Dialing from a Digital Cellular or Cordless Telephone Placing VCO or HCO CallsVoice Carry Over VCO Calls Hearing Carry Over HCO Calls Receiving CallsPlacing a Call on Hold and Transferring a Call Connecting the PrinterPrinting a Conversation Printing a Conversation Stored Conversation Memory Printing a ConversationPrimary Functions FunctionsPress Q90D Secondary Functions Secondary Functions Using the Ctrl Key and One Function KeyHold down Press Function Hold Press Function Down Secondary Functions Using with Both the Shift and Ctrl KeysESC Programming Your Q90D ProgrammingPhone Directory Adding Names and Numbers to the Phone DirectoryAnswering Machine When Your Q90D Becomes a Text Answering MachinePersonalized MSG1 and MSG2 Saved MessagesMenu Options Dial ModeScrolling and Reading the Saved Messages Remote Message RetrievalInternational Speed FlasherAuto Return Repeat KeyAuto Answer Auto IDAuto Greet Rings Before AnswerThen TroubleshootingBatteries Caring for Your Q90DCommonly Used Abbreviations TTY User’s EtiquetteImportant Information for Customers Part 68 of FCC Rules Regulatory ComplianceThis telephone equipment is hearing aid compatible Part 15 of FCC Rules InformationImportant Information for Customers Industry Canada Technical SpecificationsWarranty Procedure Product Specifications
Related manuals
Manual 108 pages 43.28 Kb Manual 12 pages 12.36 Kb
Top Page Image Contents